Treonica Auto is a system software product for Palm OS smartphones. It integrates with Palm OS to bring you very slick control of the Auto-off feature of your device via three methods:
- a toggle hotkey accessible from any point in the Palm OS user experience
- automatic Auto-off disabling/enabling for chosen applications when they start/stop respectively
- manual Auto-off disabling/enabling from the program's simple user interface
All methods are available for use simultaneously yielding ultimate control.
Audio/Visual indicators are provided to let you know what the software is doing.
Customizable features include:
- 5 different hotkey keyboard/hardware button press combinations to invoke the toggle (left side button by default)
- a wide range of Auto-off enabling timeout durations (more than provided by the Palm OS Preferences panel)
New Version 4.0 Features:
The following new usability improvements have been incorporated into the v4.0 release (over the previous v3.02 release). There have been no bug fixes. In the first bullet point there is talk of resets and unintentional resets (i.e. crashes). It should be noted that nobody has ever observed Treonica Auto causing a crash for supported devices.
- If your device is reset, either intentionally or unintentionally (i.e. a crash) and Auto was `PLUGGED into Palm OS' at the time, it will automatically plug itself back in when your device restarts. If it was `UNPLUGGED from Palm OS' when the reset happened, it will remain in that state after your device restarts. With v3.02 if Auto was `PLUGGED into Palm OS' at the time of a reset, after your device restarts it will not plug itself back in.
- After making any change to either Auto's own Auto-off enable duration, the toggle hotkey mapping or the application entry/exit table (when it's already `PLUGGED into Palm OS'), that change will be effective immediately. With v3.02 you have to UNPLUG then PLUG IN again for the change to take effect.
- Application saved preferences will be used for all the user configurable parameters, such as those mentioned in the previous bullet point. This means all that data will be saved when you HotSync, so for example if you wanted to hard reset your device to clean it out properly or you simply wanted to remove Auto, your application entry/exit table and the other settings can be reloaded so you don't have to set them up again. With v3.02 application unsaved preferences are used for all user configurable parameters.
Like it? Share with your friends!
Supported operating systems:
Palm OS 5.x
Similar Software:
StartAp StartAp is a PDA extension application that allows the user to select which application to start when power is applied to the PDA. Instead of returning to the same application that was running when the PDA was turned off (or powered itself off) the user selected application is started when the PDA is powered on
FlashInfo FlashInfo is an ULTIMATE tool to show the internal system information of your PalmOS-based device! Pop up from background!
Via FlashInfo, you may find out potential problems of your device and make your device running more stable!
It is a Power tool for Power user!
MAIN FEATURES:
Alarm List: List all registered alarms
keepoff keepoff - will disable the keyboard on a Treo (600) until the power button is pressed, or a screen tap, even when the device wakes up for email or alerts.
KEEPOFF locks out all keys when the Treo is turned off (with the power button) UNTIL IT IS TURNED ON AGAIN using the power button. YOU MUST DISABLE KEYGUARD for this to work properly
LClipDA LClipDA allows you to use large 10 clip boards.
It uses original DB, so it's maximum size is 4kB!
To Copy:
Select some words to copy and launch the DA.
To Paste:
Put the cursor where you want to paste and launch the DA.
If you tap a number button or input a number with graffiti area,which you want, the data will be put.
The "d" button means delete
FastCPU FastCPU program is designed to control your device speed parameters. Using this program you will be able not only to double the speed of your applications performance but also to save the system energy understating data bus and central processing unit (CPU) clock rate. Easy and logical control functions allow you to operate the system in confidence
System Password Cleaner System Password Cleaner - Have you ever lost or forgotten your security password?
Don't miss your personal records anymore! Just sync this little app and press it's only one button and..
ClipString5 ClipString5 bypass the 1000c limit of the clipboard, records all texts on the palm screen to the clipboard, ClipString5 is also a clipboard viewer
NoWaiTZ NoWaiTZ removes wait states from RAM and ROM on IIIx and V, and minimizes streaking on the 3x. Does NOT interefere with beaming or serial port speeds since it DOES NOT OVERCLOCK.
Any instability is because the system will not tolerate the lowered wait states (or an app uses a static timing loop and won't work at higher speed) and is not something I can fix
Trap Snooper Trap Snooper - Have you ever wondered what trap is being patched for a certain program or piece of hardware (camera, joystick, etc.)?
When a trap is patched the ID of the trap will be shown in the center of the screen for several seconds.
To locate further information about the trap see the CoreTraps.h from the Palm SDK
PetitLauncher Developers and users alike wish for a simple way to launch programs for a long time. PetitLauncher could be a good solution. It works with the concept of a magic button. You press it, and then enter a command via Grafitti which is then executed.
PetitLauncher is organized like the prefs application of the Palm OS. The settings tab is straightforward
Other Software by developer «Treonica»:
not found
Comments on Treonica Auto:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
