EVDash is a Palm OS application that acts as a set of dash board gauges for electric vehicles. It displays battery pack voltage, amps being drawn from the battery pack, and two different estimates of remaining battery capacity. It works with Xantrex's Link 10, formerly called the E-Meter. Just plug the Palm device into the E-Meter, preferably through an optical isolator to protect the Palm device and start the EVDash program.
- Voltage - Battery pack voltage.
- Amps - Amps being drawn from or put back into the battery pack.
- Capacity based on voltage - Capacity calculated from the pack voltage under very low load. Voltage drops off as pack capacity drops.
- Capacity based on amps - Capacity calculated from the amps drawn integrated over time compared to the pack capacity. The peukert effect is taken into account.
Once you install the EVDash.prc on the Palm pull down the menu and go to the setup window. Enter the pack capacity and the Peukerts constant. The state of charge voltages should be determined experimentally by recording the voltages as the battery pack is completely discharged.
To transfer ASCII data from your Palm, use the standard Hot sync cable and a terminal program. Set the following communications information:
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
CradLit Hack CradLit Hack - This is a very simple hack.
It just turns on the backlight when the device is placed in the cradle, and off when the device is removed.
After placing it in or out of the cradle, the backlight will behave normally.
It may be fooled by modems and other serial devices that attach where the cradle attaches
TrapWeaver TrapWeaver is a utility for the Palm OS which protects your device from crashing due to overlapping system patches. If you install HackMaster hacks or run 3rd-party apps that patch the OS, you need TrapWeaver! TrapWeaver stabilizes your device by transparently managing and protecting ALL system patches from writing over one another
swiz Virtual MessageEase german swiz Virtual MessageEase german - This VirtualGraffiti stamp can be used with MessageEase on SonyClie devices with OS5. It is based on the design of the swiz fonts.
The layout needs little reprogramming of some keys (read the ME manual).
The layout is made for the German characters. So, if you like it, please request me to do other designs..
Treo Button Manager Treo Button Manager is a free program to manage all the button overlay files (skins) that are available for the Treo 600 smart phone.
Many of these overlay files can be found in the discussion groups at various Treo web sites.
The most complete collection is available at: mytreo.net. Many are also available at: "Treo Central"
Phone Connection On Shortcut for Power Hero Phone Connection On Shortcut for Power Hero - This is a shortcut for Power Hero that helps you quickly manage power on your Treo or Centro smartphone. You might want to link it to a favourite so you can use Butler's keylauncher to press and hold a key and do the relevant job. It requires Power Hero to be installed
Chandra Images Vol #3 Chandra Images Vol #3 - Chandra Images Volume #3 is a database of images for Open Logo Hack, a HackMaster style hack for the PalmOS, which displays startup and shutdown screens.
Basically I got tired of looking at the stock "Powered by Palm" logo or the Tux graphics that come with OLH and decided that NASA had a lot of nifty free images available
ClockupDA ClockupDA is an overclock/underclock utility. Using ClockupDA, you can enjoy palm applications quicker than the normal speed.
Since ClockupDA is a DA (Desk Accesory) application, you can change master clock of Palm device on any applications (10MHz-42MHz)
Bluetooth Off Shortcut for Power Hero Bluetooth Off Shortcut for Power Hero - This is a shortcut for Power Hero that helps you quickly manage power on your Treo or Centro smartphone. You might want to link it to a favourite so you can use Butler's keylauncher to press and hold a key and do the relevant job. It requires Power Hero to be installed
PrefsPlus PrefsPlus is an easy to use utility that gives you more preferences
Other Software by developer «Peter Ohler»:
EV1Dash EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. The intent is to provide more information to the driver so that range and performance can be optimized. Here is one of the displays. There are two other displays
