IrOff - "Beam receive" is a feature that allows a Palm handheld to continuously scan its IR receiver for incoming transfers.
It is useful in some situations, but it draws a fair amount of power from the battery and reduces autonomy.
You can turn this feature off from the Prefs/General panel; but on Palm OS 4.x machines, the "Beam receive" preference is often unexpectedly reset to "On", even when the user has explicitly set it to "Off".
This utility allows you to keep the "Beam receive" preference always off, and thereby increase the autonomy of your handheld.
IrOff requires PalmOS 4.0 or higher (it has no purpose on previous versions).
Once the PRC file is hotsynced to your handheld, launch the "IrOff" application, and check the "Keep beam receive off" box.
The counters at the top of the screen display the number of times that IrOff checked for Beam receive preference, and the number of times it actually changed it from "On" to "Off".
IrOff is automatically reactivated after a soft reset.
IrOff has been reported to crash the Clie PEG-T675C at reset (under investigation).
IrOff is freeware. You are allowed to distribute it as long as you don't charge for it or alter it in any way.
IrOff is offered in the hope that it will be useful, but the author can not be held responsible for any damage that would occur from its use or the impossibility to use it.
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
Similar Software:
Tool One BW Tool One BW - shows information of your PALM based handheld.
It will show you information of memory cards, user, battery, RAM and ROM, free RAM, PALM ID etc.
Tool One shows most needed system information of PALM based PDA's
USB Sync Fixer USB Sync Fixer - Some Palm M500's and M505's have sporadically quit Hotsyncing. One way to solve this issue is to drain the battery on the Palm until it is absolutely dead. Then charge the Palm back up and it will Hotsync again.
While this does not work on every Palm, we've found it works on about 8 or 9 out of every 10 Palms
JackFlash JackFlash is the fastest way to expand the memory of your Palm Handheld. Get up to 40% more memory without modifying your hardware.
JackFlash gives you access to the extra Flash space available on most Palm devices. On compatible devices, only a portion of the Flash ROM space is reserved for the operating system
Button Launch Button Launch is a utility to let you launch applications (and prefence panels) by combinations of the hardware buttons.
Button Launch uses 6 of hardward buttons (the two scroll buttons and the four "application" buttons) in two ways: a short tap (tap) and a long press (tap and hold for more than 1/3 of a second)
StabilityTest StabilityTest - With the amount of applications and hacks for Palm OS growing steadily, lots of Palm users faces frequent system crash, or system unstability problems.
StabilityTest v1.2 allows Palm users to test their device, packed with software, on stability and system crash issues. It is extremely easy to use, also for beginners
FlashInfo FlashInfo is an ULTIMATE tool to show the internal system information of your PalmOS-based device! Pop up from background!
Via FlashInfo, you may find out potential problems of your device and make your device running more stable!
It is a Power tool for Power user!
MAIN FEATURES:
Alarm List: List all registered alarms
Treochat@NGrant.com Treochat@NGrant.com - Control insertions and removal of SD Cards:
Treochat will notify you if a SD Card is removed. When you insert a card Treochat will start FileZ, the best file management program for the Treo available.
Call a contact via the call button:
Treochat will allow you to enter part of a contacts name, then search the contacts (Address Book) for a match
System Password Cleaner System Password Cleaner - Have you ever lost or forgotten your security password?
Don't miss your personal records anymore! Just sync this little app and press it's only one button and..
CryptoPad-HE CryptoPad-HE - This version of CryptoPad has been adapted to use some of the HandEra 330's features, including the fonts, graffiti area minimization, and the jog wheel
pAutoLock pAutoLock is a program that activates the security application to lock your Palm if it's off more than xxx seconds or after a reset.
Documentation
1. Menubar
2. Status field (active or inactive)
3. Timeout in Seconds (10800 = 3 hours)
4. Deactivate pAutoLock
5. Activate pAutoLock
6. Quit and return to application launcher
7. pActivate locking on reset
8
Other Software by developer «Olivier Gerardin»:
not found
Comments on IrOff:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if IrOff supports it
