DynaClock adjusts CPU speed based on demand of the current application.
CPU speed is adjusted once every second. You may configure applications to be run at a certain minimum speed or set a maximum speed. This application produces noticeable gains in battery life. Try it with a free 14-day trial.
· 14 days trial
Like it? Share with your friends!
Supported operating systems:
Palm OS 5.x
Similar Software:
Send to Card Send to Card makes any Send-aware application export its data to card. It can be invoked in any application using the system "Send" command, i.e. most built-in applications and a lot of third party utility software.
Send to Card simply writes data to a file. You can adjust the filename and folder. The standard folder for a given file type is used by default (e.g
InfoClerk InfoClerk is your powerful, adaptive and easy-to-use device inspector: you can see all the hidden secrets of your handheld, gaining access to 150+ features.
It lets you control every feature of your Palm Powered device and it reveals to you all its power in an instant, showing system information in a very detailed way (see the following detailed list of features)
DevInfo DevInfo display various inside information of the Palm device
LClipDA LClipDA allows you to use large 10 clip boards.
It uses original DB, so it's maximum size is 4kB!
To Copy:
Select some words to copy and launch the DA.
To Paste:
Put the cursor where you want to paste and launch the DA.
If you tap a number button or input a number with graffiti area,which you want, the data will be put.
The "d" button means delete
Button Launch Button Launch is a utility to let you launch applications (and prefence panels) by combinations of the hardware buttons.
Button Launch uses 6 of hardward buttons (the two scroll buttons and the four "application" buttons) in two ways: a short tap (tap) and a long press (tap and hold for more than 1/3 of a second)
ROM Search ROM Search - This program helps you locate ROM in the memory map of your device.
Displays it's beginning address (pointer) and it's size
GConsole GConsole - The program is intended to let user change system features which is not available from "Prefs". Currently it can control/show battery type and auto-off time, memory usage and defragment, cpu frequence, LCD brightness/contrast/backlight and display mode and HotSync user name.
NOTE: PLEASE READ MANUAL BEFORE YOU INSTALL AND USE THIS SOFTWARE
IrOff IrOff - "Beam receive" is a feature that allows a Palm handheld to continuously scan its IR receiver for incoming transfers.
It is useful in some situations, but it draws a fair amount of power from the battery and reduces autonomy.
You can turn this feature off from the Prefs/General panel; but on Palm OS 4
Other Software by developer «PalmPowerups»:
FrameTX FrameTX removes the 2-pixel wide white border around the screen in T|X, LifeDrive, and T|T5
FAT32 FAT32 - FAT32 driver for OS5 devices without it. Allows use of 4GB cards on those devices
Treo Ringtone Installer Will install MP3 ringtones from card to Treo 680 without loss of quality. Source code included
PowerVolume PowerVolume - system-wide volume regulation, can lower hiss in headphones
UnCache UnCache is a utility that will let you directly determine what applications get Launch code 5.
"What is Launch Code 5?" you might ask. It is a launch code that is sent to ALL applications when palm is resetting. "ALL?!?!?" you might ask, "Isn't that too much?" Well...yes, so PalmPowerups fixed it
E2 Internal Drive E2 Internal Drive exposes the internal NVFS drive for use as a built-in card a-la T|T5
GrandCentral Dialer A dialer application to dial any number through the GrandCentral service
warpSpeed warpSpeed is an overclocking/underclocking utility for PalmOS devices. It also, for some devices, has the ability to kill the infamous screen whine. This program is unique because it does not limit the user at all, so you are free to experiment with no limits. Every single possible speed on your hardware is acessible to you
Flash Installer Installs the Flash Player normally found on Sony devices
Preferences II Preferences II - replacement for the standard preference panel that provides icons, and custom categories. Source code included
