Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application.
WARNING: if run unattended, this application can drain your mobile battery, as the device auto-off is disabled. Of course, default setting are restored when leaving the application
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Reflect Reflect turns your Palm handheld into a mirror.
It is packed with features and open source.
The latest version includes: preferences that are saved between sessions, infrared beaming from within the application, Graffiti ShortCuts for all menu items, and monochrome and color support.
Reflect is freeware released under the GNU General Public License (GPL)
Screen Prefs Screen Prefs sets the default screen color/gray scale depth and color scheme for your Palm OS device. It can handle screen modes from black and white (1-bit) all the way up to 16-bit color.
This program shows up in your Palm Preferences application (known as Prefs) and not in the application launcher. However, it can be configured to show up in the application launcher
GreenLightHack GreenLightHack is a HackMaster hack that reverses the polarity of the screen when the backlight is turned on (all white pixels become black and all black pixels become white).
This has the effect of making the backlight on the old Palm models (Palm III and below) look like the new ones, and the backlight on the new ones (Palm IIIx and above) look like the old ones
DData DData - This application displays the details of your devices screen.
I.E. width, height etc. It also features a guide to the screen resolutions.
Exiting the application is via the home button.
Please install the newer version of PluaRT, along with DData
Profeo LightControl Profeo LightControl is one of the most advanced light management utilities for palmOne Treo 600 smartphones, suitable for people who don't want to install a profile manager on their Treo. It provides you with complete control over the lights of your palmOne Treo 600
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
LightHack LightHack - A neat feature of the Palm IIIx and Palm V: when the backlight is activated, the dark pixels light up instead of the background. LightHack provides a similar feature for the Palm III (and older Palm devices with backlights) -- whenever the backlight is activated, the screen is inverted so that the text lights up, and the background stays dark
View:selF View:selF is another mirror for your Palm
Other Software by developer «Pierre Lescuyer»:
Polyedre by Pierre Polyedre by Pierre does nothing really useful. Pre-defined 3D grid volumes can be rotated around two axis using up / down / left / right hard buttons. This simple program was my first attempt for using Palm SDK graphic lib and hard button management.
Rotating step can be tuned through the Preferences.
This program works fine on Palm OS 3.5 and above
Metronome by Pierre Metronome by Pierre is a full featured electronic metronome.
Pulse volume, frequency and duration can be adjusted on a single screen.
In addition, Auto-off can be disabled (for usage over long period of time) and battery status can be displayed.
This program works fine on Palm OS 3.5 and above. Tested on the palm M and T series
UmtsCrunch by Pierre UmtsCrunch by Pierre is a database for UMTS Release 5 specifications, the so-called 3rd generation telecommunication system. The Zip file contains a .PRC and a .PDB file which need to be both installed on the Palm.
The program allows any kind of search through the list of database entries.
The database only contains specification title and name
QuarkBox by Pierre QuarkBox by Pierre is a simulation of particles confined in a box, to observe effect of gravity on trajectories. Up to 100 particles can be added/removed using up/down hard buttons. Gravity can be tuned as in preferences.
This program requires Palm OS 3.5 or above. Color as well as Grayscale devices are supported
