Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application.
WARNING: if run unattended, this application can drain your mobile battery, as the device auto-off is disabled. Of course, default setting are restored when leaving the application
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
AutoBacklight AutoBacklight is a small application that allows to adjust backlight intensity according to the current time. It helps to improve display readability and optimize power consumption. It means that your PDA will run longer without recharging
Inmobile Lighter Inmobile Lighter - Mobile device lighter. Can you believe it?
Take it on your PALM to concerts, night clubs, parties etc.
Remember those concerts when you burnt your fingers when lighting a regular lighter? Or when the lighter didn't work? Or even when the wind used to constantly blow out your lighter?
Well, those days are over
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
Banner Banner - Write huge messages on a PalmOS screen.
Communicate at a distance with your low-tech friends! Send messages in noisy environments and through windows! Write rude words in huge letters!
Banner accepts a text message and scrolls it in huge letters across the PalmOS screen. While the message is scrolling, press the up or down hardware buttons to interrupt
TinyMirror TinyMirror - Unlike other mirrors, TinyMirror uses the whole screen (there is no annoying menu bar to ruin your reflection).
TinyMirror can also display an all black or an all white screen.
You can toggle between the two by pressing the scroll buttons.
TinyMirror can also conveniently transform into a flashlight if the backlight is turned on
Tk Torch Tk Torch - Do you find yourself using your smartphone or PDA as a torch? This little application utilizes the entire screen for maximum brightness and lets you choose how long to keep the backlight on, over-riding the built in limit of 3 minutes auto off
StayOn for Fossil WristPDA StayOn prevents the backlight from automatically turning off after 10 seconds of inactivity
Lightswitch for Palm Lightswitch for Palm is a software control for switching the backlight off and on.
This is faster and easier than holding down the power button.
For PDA's not fitted with a backlight, it lets you adjust the brightness.
What's New in This Release:
· Explicit turn backlight on ond off buttons
· Show backlight status, whether off or on
ZoomThis ZoomThis allows you to magnify portions of your handheld display. Use ZoomThis to magnify phone numbers, addresses, or any other information. ZoomThis is particularly useful when ambient light is low, and the backlight is not enough. Just tap two corners of the area you want to magnify! Works on PalmOS 3.5 or higher
DData DData - This application displays the details of your devices screen.
I.E. width, height etc. It also features a guide to the screen resolutions.
Exiting the application is via the home button.
Please install the newer version of PluaRT, along with DData
Other Software by developer «Pierre Lescuyer»:
QuarkBox by Pierre QuarkBox by Pierre is a simulation of particles confined in a box, to observe effect of gravity on trajectories. Up to 100 particles can be added/removed using up/down hard buttons. Gravity can be tuned as in preferences.
This program requires Palm OS 3.5 or above. Color as well as Grayscale devices are supported
Polyedre by Pierre Polyedre by Pierre does nothing really useful. Pre-defined 3D grid volumes can be rotated around two axis using up / down / left / right hard buttons. This simple program was my first attempt for using Palm SDK graphic lib and hard button management.
Rotating step can be tuned through the Preferences.
This program works fine on Palm OS 3.5 and above
Metronome by Pierre Metronome by Pierre is a full featured electronic metronome.
Pulse volume, frequency and duration can be adjusted on a single screen.
In addition, Auto-off can be disabled (for usage over long period of time) and battery status can be displayed.
This program works fine on Palm OS 3.5 and above. Tested on the palm M and T series
UmtsCrunch by Pierre UmtsCrunch by Pierre is a database for UMTS Release 5 specifications, the so-called 3rd generation telecommunication system. The Zip file contains a .PRC and a .PDB file which need to be both installed on the Palm.
The program allows any kind of search through the list of database entries.
The database only contains specification title and name
