IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3.
IR Ping uses the built-in IrDA stack of these devices and allows to play around with various IrDA functions and commands:
Discover - This command starts a discovery on the IrDA medium. All devices within the range are displayed with hardware address, hint bits and device name. The first device discovered will be used for the connect/test commands.
Connect IrLap - With 'Connect IrLap' a IrLap connection is set up to the first device discovered during the discovery.
Discon Irlap - Disconnect a running IrLap connection
Connect TP - Tries to set up a TinyTP connection. Therefore requests the receivers TinyTP-Lsap from the IAS data base of the receiver and on receipt requests the TinyTP connection.
Connect LMP - Sets up a IrLMP session. Requests the receivers IrLMP-Lsap from its IAS data base and requests a IrLMP connection. Some devices (e.g. the windows95 ir stack) have a short timeout between setup of the IrLap connection and the TP/LMP connection has to be set up shortly after the IrLap connection is established. Otherwise the device sends a disconnect.
TestReq - With this function a IrDA test is requested.
SendReq - The transmission of a data packet is requested. IR Ping sends 16 bytes (0x00, 0x01, 0x02 ... 0x0f) to the connected machine.
RxSize - The command displays the maximum packet size, the connected machine will transmit.
TxSize - This command displays the maximum paket size that can be transmitted.
DeviceName - This command requests the DeviceName from the receiver IAS data base. The answer is displayed with the next IAS callback.
All feedback, error and status information is displayed in a scrollable 80 lines buffer display.
What to do with this program?
This program is intended as a base for real IrDA applications. Just use IR Ping to check if your printer, cellular phone, notebook or PDA really talks the IrDA protocol and start writing an application like:
* printer driver for IR printer
* interactive (action) games
* internet communication over cellular phones
* backup, restore or HotSync to IrDA notebooks
* or just code segments like a selector box showing all IrDA devices in range and let the user select one
* ...
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Instant Mobile Website Creation Instant Mobile Website Creation - Software for Instant Mobile Website Creation. Download this free software and create an unlimited number of mobile websites and be part of the mobile revolution that takes place on the internet right now. The software allows you to produce as many pages and subpages as you like
App Log I use this for my own PDAToolbox development to track files, field names, CIDS, etc
ED PLua IDE ED PLua IDE - Use this Development Environment to create Palm pda applications (or even games) by taking advantage of the LUA language.
This IDE is designed to work with the interpreter/compiler PLua, PLua itself comes with an IDE but this one is limited to the palm platform, that's why I decided to write an IDE for windows
JExpense2CSVFull JExpense2CSVFull - A Java Jar File to dump the built-in ExpenseDB.pdb of the Palm. It should be compatible with all kinds of Palm os. Up to now the file format of the ExpenseDB has not been changed. Export the Database using tools like pilot-xfer or backup Buddy. The labels of the columns are listed in the first line of the dumpfile
Fire j2me Fire j2me is a library that aims to provide a set of easy-to-use extendable components to J2ME developers.
The basic set of Fire components offer all the functionality of the J2ME GUI components provided in the midp2 profile (Forms, Items etc.) plus a much more appealing user interface, themes, animations, popup menus, and better component layout
Revisions Revisions - Here's one for developers. Do you write software, and want to keep track of your revisions? Here's a simple application that will record those details. A secondary use would be to record what you plan to change, and then you can tick off when done, noting the revision number
Palmphi Palmphi is a Windows desktop tool for visual design and PalmOS code generation.
The main features are:
WYSIWYG.
Visual design
Object inspector for controls and forms, like many visual IDEs (Delphi, Visual Basic,...).
Class browser with help, so you get instantly information about each method
BrainF#ck BrainF#ck-This is a full onboard Palm IDE for the BrainF#ck programming language, you can edit, debug and run BrainF#ck programs. You can watch the current memory, output and even run the program step by step. A short BrainF#ck description can be found here
FtrList FtrList - I once needed a small tool to check which features were installed and what their values were and came up with this small program.
The program consists of a list in which all installed features are shown.
The first column is the creatorID of the owner, the second the feature number and the third the value in hex
Other Software by developer «Till Harbaum»:
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
No Streak Hack No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
Real Freedom Real Freedom is a converter for Phoinix cartridge images. It can convert images from the format used by the Gameboy emulators Liberty (commercial) and Phoinix/PalmBoy (free) and gameboy cartridges stored on SmartMedia using the axxPac into the Phoinix format.
Currently the converter creates a blank RAM image for cartridges with built-in RAM
Mulg Mulg - Guide the marble through the maze and to the cross. Along the way you'll encounter stones blocking your passage, flipper bumpers, slippery ice, and several other obstacles. Be sure to visit Till's web site for hundreds of additional levels
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
