EVDash is a Palm OS application that acts as a set of dash board gauges for electric vehicles. It displays battery pack voltage, amps being drawn from the battery pack, and two different estimates of remaining battery capacity. It works with Xantrex's Link 10, formerly called the E-Meter. Just plug the Palm device into the E-Meter, preferably through an optical isolator to protect the Palm device and start the EVDash program.
- Voltage - Battery pack voltage.
- Amps - Amps being drawn from or put back into the battery pack.
- Capacity based on voltage - Capacity calculated from the pack voltage under very low load. Voltage drops off as pack capacity drops.
- Capacity based on amps - Capacity calculated from the amps drawn integrated over time compared to the pack capacity. The peukert effect is taken into account.
Once you install the EVDash.prc on the Palm pull down the menu and go to the setup window. Enter the pack capacity and the Peukerts constant. The state of charge voltages should be determined experimentally by recording the voltages as the battery pack is completely discharged.
To transfer ASCII data from your Palm, use the standard Hot sync cable and a terminal program. Set the following communications information:
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
i-Bar plugin 1.05 i-Bar plugin 1.05 - A "dial-by-photo" plugin for 2day, DateBk6, Initiate, Propel and more...
Attention: i-Bar plugin is FREE for users of TAKEphONE !
· Shows a line of 5 speed-dial buttons across the screen.
· Can be operated using the 5way navigator (in some apps).
· Buttons can show an image, icon, or text
PowerDA A DA to simulate pressing the power button on your device
CradLit Hack CradLit Hack - This is a very simple hack.
It just turns on the backlight when the device is placed in the cradle, and off when the device is removed.
After placing it in or out of the cradle, the backlight will behave normally.
It may be fooled by modems and other serial devices that attach where the cradle attaches
HackFinder HackFinder - Hacks are little pieces of code that replace or extend functions of the PalmOS.
Usually hacks should be managed by a hackmanager like HackMaster or X-Master, but sometimes they patch the system by themselves, possibly risking conflicts with other hacks/ applications
TealMaster French TealMaster French - Replace Hackmaster with TealMaster, the supercharged 100%-compatible system extensions manager. TealMaster adds enhanced stability, configuration and diagnostic features and PalmOS 5.0 hack emulation.
With numerous unique features, TealMaster sets the new standard for managing system extension programs, commonly called "hacks
Clie ScreenLock Fix Clie ScreenLock Fix is a patch that makes WinScreenLock() work on certain very old Sony Clies by fixing one of Sony's bugs.
This fix allows FlipHack to work properly on those devices. Note that if you bought anything other than the earliest Clies, this probably won't help you. For more details, see the README.
Clie ScreenLockFix is released under the GPL
X-Master (Swedish) X-Master (Swedish) - X-Master manages PalmOS system extensions (aka Hacks).
X-Master is a free compatible successor to Edward Keyes' Hackmaster and offers various improvements, both technical and in the user interface
PrefsPlus PrefsPlus is an easy to use utility that gives you more preferences
Other Software by developer «Peter Ohler»:
EV1Dash EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. The intent is to provide more information to the driver so that range and performance can be optimized. Here is one of the displays. There are two other displays
