PowerSDHC - As you may be aware, most Palm devices that do not carry a "Treo" or "Centro" brand cannot read or write to the new SDHC cards. This leaves everyone owning such devices behind in terms of storage and costs. SD cards top out at 2GB, while SDHC cards are available at 32GB sizes already, and 16GB cards can be obtained for less than $80 USD.
Palm Inc has repeatedly refused to write an SDHC driver for their handhelds. This has long been regarded as a lost cause by most Palm owners. Luckily Palm Inc are not the only ones in power to help. PalmPowerups to the rescue! We've been hard at work creating an SDHC driver for your devices. It is very difficult and has been one of the most complex projects we've ever undertaken here. It is made harder yet since each individual device needs to be uniquely supported and programmed for.
Today we're glad to announce that for for a small set of devices the driver has entered beta testing. Due to huge demand to make the beta available to everyone, it has been decided that the beta will be available for purchase as well. It is more expensive than the final version will be, for reasons that are beyond the scope of this document. Internally we've been using it on our devices, and it works well, so we're reasonably confident that it will work for you too.
There are caveats of course. First, to use cards whose size is 4GB or over, your device needs to support the FAT32 filesystem. Only Palm LifeDrive and Palm TX ship with it included. All other devices will need to install a FAT32 driver. There is only one option for where to get one - Palm Inc. We here at PalmPowerups are currently investigating writing our own due to reasons mentioned later in this document. For now you may download our wrapper and installer for Palm's FAT32 driver. All you need to do is install it to RAM and reset. Your device will now support FAT32. Please note that Palm's FAT32 driver is VERY inefficient and slow when mounting cards. Thus on slower devices it can take up to 30 seconds to recognize an inserted 32GB card. This delay goes down for smaller cards, and when we release out own FAT32 driver, it will go away. Also this delay is not present on LifeDrive and TX devices. Another caveat, which is well known to our customers who purchase PowerDrive, is that PalmOS cannot display card sizes over 4GB or free space over 4GB. This does not mean it cannot use them, just that the display of card size and free space will be wrong. This is usually just a cosmetic error, and will usually not cause errors or problems. We are investigating a possibility of releasing a patch to alleviate this problem, but there is no certainty on this yet.
The following devices are next on the roadmap and should be supported soon:
* Tungsten E
* Tungsten C
* Tapwave Zodiac
* Tungsten T3
The process to get a trial version is simple. First you need to register a username on the PalmPowerups site. Then you need to download the trial version PRC file. Now run it. It will give you your device ID, which will be something like 2134CD6E. Write this down. Your device will now reset; this is normal. Now click here and fill in the required data. Please be very careful to fill it in correctly. when you do this, you will be given a link to download a keyfile. Download it and save it to a safe location, you will not be able to re-download it. You now need to install it to RAM of your device. Do so, and run PalmSDHC again. It will blink and return to the launcher screen. The SDHC driver is now active. Your device will get your attention and tell you about the trial expiration and limitations. You will have unrestricted access for 3-4 days, after which the driver will become read-only and speed-limited to a very low speed of 50 KB/s. At this point you may delete it and soft reset to remove it, or purchase it to get a new key file, that will not expire.
This is a beta version, so please report any bugs and problems you may have with it. Of course when the release version comes out, you will be entitled to the upgrade for free. The release version is coming later, and will cost $20 USD. Also note that for the beta, the driver must stay in ram, and you must run it after a soft reset to regain SDHC functionality. This is a precaution against driver conflicts.
As always we're not responsible for any data loss or any damage that may occur as result of using our software and all efforts are made to ensure it does not happen. Please read this document carefully before proceeding.
What's New in This Release:
· Fixed a serious bug. Delete older versions and update to avoid problems.
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Character Coach Character Coach is a Palm system extension that helps you use Graffiti more effectively.
It augments the Palm's on-screen keyboard with a small floating window that shows you the Graffiti strokes for each character that you tap on the keyboard
Fast Cap Hack Fast Cap Hack - help inputing capital letters without writing the cap. shift.
You can input the capital letter by writing across the alphabet area and numberic area.
I develop this hack for own use. But I would like to share it as freeware if anyonelike it. So, USE AT YOUR OWN RISK.
· Resolve the conflict with Chinese OSs (The main reason I write this hack
TealMaster TealMaster - Replace Hackmaster with TealMaster, the supercharged 100%-compatible system extensions manager. TealMaster adds enhanced stability, configuration and diagnostic features and PalmOS 5.0 hack emulation.
With numerous unique features, TealMaster sets the new standard for managing system extension programs, commonly called "hacks
AsciiPop DA AsciiPop DA is a desk accessory that opens a pop-up window with a full ASCII chart.
Must be used in conjunction with a Desk Accessory launcher.
To use:
Use the up/down buttons, or tap the up/down icons to switch between the two screens of characters.
Tap on the desired character.
If you tap 'Okay', the chosen charactor is copied to the clipboard
Sleep for Palm OS Sleep for Palm OS is designed to convert one of your hardware buttons into a fully functioning power button. This is useful for replacing a power button that has worn out.
Sleep can also be used to move the power button to the front of the pda for convenience. Sleep is fully supported on OS version 3.0 devices and up. It is also fully OS 5 compatible
TealScript Plus TealScript Plus - Graffiti Reinvented
Replace or restore Graffiti with TealScript, the text recognition system you can customize. Unlike Graffiti or other systems, TealScript lets you make or change your own strokes for better speed and accuracy
LightHack LightHack - A neat feature of the Palm IIIx and Palm V: when the backlight is activated, the dark pixels light up instead of the background. LightHack provides a similar feature for the Palm III (and older Palm devices with backlights) -- whenever the backlight is activated, the screen is inverted so that the text lights up, and the background stays dark
TreoSelCntlHack TreoSelCntlHack - provides button and category selection on a Handspring Treo.
The functions are invoked by pressing one or two keys simultaneously. ButtonOpt+Space Next ButtonOpt+Space CategoryOpt+Menu Category UpRocker Up Category DownRocker Down SelectReturn SelectSpace .
Additionally for some Categories, pressing the first letter of the list item selects the list
X-Master X-Master manages PalmOS system extensions (aka Hacks).
X-Master is a free compatible successor to Edward Keyes' Hackmaster and offers various improvements, both technical and in the user interface
Other Software by developer «PalmPowerups»:
warpSpeed warpSpeed is an overclocking/underclocking utility for PalmOS devices. It also, for some devices, has the ability to kill the infamous screen whine. This program is unique because it does not limit the user at all, so you are free to experiment with no limits. Every single possible speed on your hardware is acessible to you
PowerDrive PowerDrive is an application for PalmOne LifeDrive devices that will allow you to repartition your device to have a bigger RAM area or a bigger internal drive area. It will also allow use of ANY other CF card instead of the original microdrive for size and speed improvements, naturally. To use this application, make sure your LifeDrive has LifeDrive v2
T3LedLib Allows developers to control Tungsten T/T3's green LED, and the undocumented and previously unused RED LED
SkinUI Cobalt Skin Source The source code and build package for SkinUI cobalt skin, to be used for making other skins
Palm Movie Maker Palm Movie Maker - PalmOne, when releasing the Palm Zire 71 clearly said that it was not powerfull enough hardware-wise to record video, and of course this created quite an upstir in the Palm user community. Personally, this was the palm of my dreams, except for that problem, but I bought it anyways, becuse my old Sony N610C was dieing
UnCache UnCache is a utility that will let you directly determine what applications get Launch code 5.
"What is Launch Code 5?" you might ask. It is a launch code that is sent to ALL applications when palm is resetting. "ALL?!?!?" you might ask, "Isn't that too much?" Well...yes, so PalmPowerups fixed it
LifeDrive CardInfo Patch Allows renaming of internal volumes and displaying of media types other then SD/MMC and "HardDisk"
PowerVolume PowerVolume - system-wide volume regulation, can lower hiss in headphones
