IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3.
IR Ping uses the built-in IrDA stack of these devices and allows to play around with various IrDA functions and commands:
Discover - This command starts a discovery on the IrDA medium. All devices within the range are displayed with hardware address, hint bits and device name. The first device discovered will be used for the connect/test commands.
Connect IrLap - With 'Connect IrLap' a IrLap connection is set up to the first device discovered during the discovery.
Discon Irlap - Disconnect a running IrLap connection
Connect TP - Tries to set up a TinyTP connection. Therefore requests the receivers TinyTP-Lsap from the IAS data base of the receiver and on receipt requests the TinyTP connection.
Connect LMP - Sets up a IrLMP session. Requests the receivers IrLMP-Lsap from its IAS data base and requests a IrLMP connection. Some devices (e.g. the windows95 ir stack) have a short timeout between setup of the IrLap connection and the TP/LMP connection has to be set up shortly after the IrLap connection is established. Otherwise the device sends a disconnect.
TestReq - With this function a IrDA test is requested.
SendReq - The transmission of a data packet is requested. IR Ping sends 16 bytes (0x00, 0x01, 0x02 ... 0x0f) to the connected machine.
RxSize - The command displays the maximum packet size, the connected machine will transmit.
TxSize - This command displays the maximum paket size that can be transmitted.
DeviceName - This command requests the DeviceName from the receiver IAS data base. The answer is displayed with the next IAS callback.
All feedback, error and status information is displayed in a scrollable 80 lines buffer display.
What to do with this program?
This program is intended as a base for real IrDA applications. Just use IR Ping to check if your printer, cellular phone, notebook or PDA really talks the IrDA protocol and start writing an application like:
* printer driver for IR printer
* interactive (action) games
* internet communication over cellular phones
* backup, restore or HotSync to IrDA notebooks
* or just code segments like a selector box showing all IrDA devices in range and let the user select one
* ...
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
JDatebook2CSVCat JDatebook2CSVCat - A small framework written in java to list the internal DatebookDB (Creator: date, Type: data) of the Palm. It is compatible with PalmOS 2.0 or better. PalmOS 1.0 should work too, but isn't tested. Up to now, the format of the DatebookDB has not been changed
SAXLib SAXLib is a freeware XML parser library for Palm OS which partially implements SAX 2 parser interface.
SAXLib is distributed in a compiled form of Palm shared library. Its distribution archive includes full library interface reference manual and sample Metrowerks CodeWarrior 9.x project which illustrates the basic principles of SAXLib usage
MDB to PDB Converter MDB to PDB Converter - A very useful tool to convert MS Access Database tables to palm database (pdb). Specially designed for developers to have their desktop data transferred on to palm. This utility will help you convert your any big size desktop access database to equivalent palm database. Also include pdb viewer which will help you to verify contents written into pdb
TCFI TCFI is short for TRGpro CF (CompactFlash) Installer.
With TCFI you can install any file directly (not really - it is explained later) from your (Palm) Desktop to your TRGpro Palm device. All you need to do is: install the Palm application to your TRGpro then convert a file (e.g. MyVoice.wav -> MyVoice
Save To Host Save To Host - allows developers to save text from this PRC to a file on the host machine; or to read text from a file on the host machine into this PRC.
This must run in the PalmOS Emulator (POSE) and is very much a developer tool
JPQA2TXT JPQA2TXT - A small framework written in java to uncompile a PQA (Creator: cpl; Type: pqa ) for the Palm. In a txt fifle will be the information about the pqa and each record like size, content, compressionType. Each HTML content will be written to a single file, each included image will be written to a BMP file (quality and size is reduced)
barchart4palm barchart4palm is a simple component for displaying bar charts on PalmOS-powered devices. barchart4palm is written in Java and transformed into a native PalmOS application using Jump2. barchart4palm is based upon the Pilot-JFC user interface library.
Target audience of barchart4palm are developers, who write applications for PalmOS using Java-related technologies
Other Software by developer «Till Harbaum»:
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
Mulg Mulg - Guide the marble through the maze and to the cross. Along the way you'll encounter stones blocking your passage, flipper bumpers, slippery ice, and several other obstacles. Be sure to visit Till's web site for hundreds of additional levels
No Streak Hack No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
