DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Ripple Lock Ripple Lock - Ripple Lock is a handy mobile application that allows you to change the appearance of your smartphone's lock screen and make it look like the one featured in Android 3.0. The software offers you full control over which shortcuts and widgets you want to appear on the lock screen
Flash Light Free flashlight application supporting several colors
LCD Density Changer LCD Density Changer - A little app to play with the LCD Density Settings. It lets you set the LCD Density Setting without editing the build.prop file (directly).
Be aware that the tweak only will work with launchers like LauncherPro. It doesn't work with Samsung's own TouchWizardLauncher
Toggler Android application to toggle wifi, gps, and set screen brightness
Screen Regenerator Screen Regenerator - The screen of your smartphone is damaged every day. The pixels of the screen do not suffer even wear what causes the appearance of dead pixel and premature death of it.
Screen Revival is designed to reset the pixels of the screen to its factory state using a succession of pure colors
Blinky Blinky is an enhancement application to the standard BLN which blinks the LEDs. It gives you an extraordinary amount of control, and can even vibrate for those who have their phone in their pocket.
Only works on the Galaxy S line
FlashLight HD LED Pro for Android FlashLight HD LED Pro for Android - Flashlight HD LED turns your Android device into a virtual torch. The app can generate light using both the display of your phone and the camera flash.
Flashlight HD LED has a simple and elegant design which allows you to get light instantly with just a press of a button
FlashDroid FlashDroid is an open source Flashlight application.
This tool take advantage of your phone's bright screen to help you find your stuff in the dark.
This flash light application is a demonstration of how to make your Android application run in full screen
Go days calendar Go days calendar - is a simple but very interesting calendar reminder widget. It will be reflected on the home screen of your device and will show maximum information regarding the scheduled event
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Pantech Sirius Alpha IS06
