DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
IQ Light Use your phone as a flashlight. Helps you find your keys on the dark. Small and simple application that sets your mobile phone's display to white
Nightlight Free Nightlight Free - Use your Android phone or tablet as a nightlight to illuminate your rooms and hallways. This app display a white screen so that your mobile device acts as an ambient nightlight. You can also use it as a lantern to walk in the dark. App keeps your phone awake and full-bright while this app is running in the foreground
死點復修器 Dead Pixel Fixer 死點復修器 Dead Pixel Fixer - This simple app is to try to fix any dead pixel in your Android device. Just tap on the dead pixel to proceed the recovery. It stimulates the screen region with flash. Keep your device wake up mode and screen on, let the flash square runs for about 15~30 minutes, the pixel can be repaired. It is free for use
TeslaLED TeslaLED - TeslaLED is a LED flashlight app for many phones
LED Scroller 3 Communicate in style! Don't say it - scroll it!
Auto Lock Unlock Ad Back in the old days when smart-phones are not the rage yet, the phones we have usually have those keypad lock mechanism. It help to prevent accidental press of buttons on the phone when we tuck our phones into pockets or bags etc
Screen On Screen On - This Android application will keep the screen on, when an application of those you have selected in the list is running. It periodically checks to find if the application is running and locks the screen not to sleep. When the application stops, the lock goes off.
Screen on when charge option
Torch-E Torch-E - This is very simple yet useful flashlight app for android and it's free. Whenever bright light is needed, use your device's camera flash as a torch. The app is so simple and easy to use, you can't possibly go wrong. It has been designed to work and look pretty on any device provided it has a rear facing camera with flash functionality
Firmus Utility Firmus Utility - Free version of Firmus Utility. Includes all the same features as the pro version, but with ad's. This application allows you to use the torch feature of your phone. It includes both battery and torch widgets. This application also includes a barcode scanner that can send barcode data to a host computer over Bluetooth or WiFi
flashlight On Flashlight On(Easy flashlight)
Camping, easy-to-use flashlight app outdoors
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device PiPO P511
