BattClock shows Time and Battery percentage above the top bar.
Very small in memory: 1 Kb in memory (check it with a task manager)
No CPU usage: 0.00 % CPU usage, check it with a task manager)
Very small on disk: BattClock.exe 17 Kb on disk, BattClock.CAB 16 Kb on disk,
Very efficient resource usage (clock update and measuring of battery percentage)
Time and Battery percentage above the top bar
Automatic detect settings the first time started, dependent of the screen resolution and colour.
12 hour clock possibility
Date possibility in format DDMM or MMDD
Only Date, Time or Battery Percentage possibility
ndicator if charging (battery percentage character % is changed into tilde character ~)
Clock width, height, X position and Y position configurable
X position from the left configurable
Automatic runtime adaption of BattClock on Portrait or Landscape mode (with negative ClockX setting)
Background and Foreground color configurable
FontSize configurable
Configurable via registry settings (or configure via TouchLockPro BattClock Settings screen and than uninstall TouchLockPro)
Supported resolutions: 240x320, 240x240, 480x480. 480x640, 480x800, etc.
What's New in This Release:
· Fixed bug that the CellTowerInfo was done once per second instead of 30 seconds. Changed into once per 90 seconds.
· Close Radio Interface Layer after getting CellTowerInfo to be sure that phone can go into a deep sleep
· Open/Close log file to be sure the phone can go into a deep sleep
· Do not log Cell Tower info to file, when there is no valid data (When CellTower reports -1)
· Updated Spanish translation, thanks to jcmm
· Updated French translations, thanks to YoLoLo
· Updated Italian translations, thanks to ephestione
· Updated German translations, thanks to Tokl
What's New in 3.5.2:
Fixed bug that display alignment got screwed up by solving "Also make it possible to align display text for Battery % when charging"
What's New in 3.5:
Fixed problem that + sign in DetectBackGround X in Others setting screen was not working
Fixed bug that import settings in BattConfig About did not remove previous settings, so the end result could be wrong (note if you import registry values directly, first remove existing ones)
Fixed that the CSV file is correctly showing the correct header for BATTERY_CURRENT or BATTERY_CURRENT_FORCE
Fixed bug that some values where only used as stripe when log was enabled for them (minutesCall, minutesDisplayOn, minutesStandby, minutesUptime)
Fixed Russian typo, thanks to d8389
Treat stripe values as unsigned instead of signed
Make it possible to show registry key HKCU/ControlPanel/Volume/Volume as a number between 0 and 100 (divide by 42949672 and unsigned arithmetic)
Reset signal strength registry key to 0 when in flight mode/radio off to overcome WM bugs/quirks
When a registry key does not exists, return 0 instead of keeping the old value
Improved performance when background image is used
Also use the Background Image for stripes, if configured
Support detectBackground negative X values to support landscape
Added option to align text horizontal (left or right) and/or vertical (top or bottom), prefix display format by < (left) or > (right) ^ (top) v (bottom) [ (left bottom), ] (right bottom) { (left top) } (right top)
Same info can be used in more than one stripe
What's New in 3.4.3:
Fixed bug that only the first 6 content items were shown in BattConfig when restarted
What's New in 3.4.1:
Protect against OverflowException in Color Picker
Fixed bug that selecting another font was not immediately reflected
Save the BattConfig log also in the directory where the program is installed
Only keep the non-default configuration values in the Registry, to save some KiloBytes of phone memory and Registry size
Improved the size of the executables (5% smaller, 33 KB less space in total)
New Czech translations, thanks to Konrad007
Updated Russian translations, thanks to Vadim Bogaiskov
Updated Spanish translations, thanks to jcmm
Updated German translations, thanks to Tokl
What's New in 3.3:
Added possibility to have 6 separate BattClock areas, so you have more control over where to position info
What's New in 3.2.1:
Fixed fallback if Wifi Bytes is not returned by Wifi Adapter (as is the case for HD2), using WifiPackets
Fixed Wifi Connect Time counting (increment when connected, not only when data received)
Fixed Mobile Connect Time counting (increment when connected, not only when data received)
Wifi updates once per second instead of once per 3 seconds
What's New in 3.1.2:
Fixed CPU speed monitor fallback for Acer with QSD8250 processor (e.g. Acer S200)
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 5.0 Smartphone, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6 Standard, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.1 Standard, Windows Mobile 6.5 Professional, Windows Mobile 6.5 Standard
Similar Software:
TodayPlus for Pocket PC TodayPlus for Pocket PC - TodayPlus can display your owner info and your picture, the current weather conditions and multi-city forecast (cities in France and elsewhere), news from various sites, the time in different cities, your calendar (appointments, tasks, etc...), the battery level, the memory level, and even a launcher
iBattery (Pocket PC) iBattery is a taskbar battery meter, based on LVMTopBat.
Changes from LVMTopBat are:
1 - Skinnable: by default iBattery draws a light grey bar, but you can change the bar color with a bitmap
By default iBattery uses a single color for all the battery states (full charge, low charge, charging, etc
iGate iGate - Nice Idle Screen is the first software that can replace system password screen (idle screen) on Windows Mobile 6.0 or 6.1.
The Pocket PC provides very simple password protection that is pin or password entry
Batti Batti is a small application which shows you remaining power of your battery. Features:
Small
Batti takes very few space of your PDA memory. The battery indicator itself takes less than 20 KB and the whole application is less than 80 KB.
Highly configurable
Batti is highly configurable to suits your needs
WMMiniBattery WMMiniBattery is a Windows Mobile 2003 / WM 5.0 / WM6 software which shows the battery status at the top of the screen with a tiny (3 pixels) bar.
If the bar is tapped with the stylus, a window will pop up and show information about the battery status. Clicking on Quit, the program will close. Ok will hide the window. To modify colors and images, just edit "bar
BacklightSaver BacklightSaver powers off the LCD display of your PocketPC and keeps the power/CPU on. Simply tap the button to power off the display. When you press the power button the display will power back on again. NOTE: The program exits once you press the button
Battery Drain Test Battery Drain Test - This app can be used to benchmark the battery life of different Windows Phone 7 devices. Run this app until the battery goes flat. Charge the phone and run the app again to find out how many minutes or hours the battery lasted.
During the test, the app must remain in the foreground and will continue run on locked screen
BattLineSvc BattLineSvc is simple WM service that adds a horizontal bar along the top of the screen to show your current battery level.
BattLineSvc features
- Shows a nice bar along the top of your screen to indicate battery status.
- Color changes based on 'warning' and 'critical' battery levels (configurable)
Disk'n Power Today Plugin Disk'n Power Today Plugin - This utility is a small plugin for you today screen. It displays the battery power and memory informations of you PocketPC. Warning the battery value on E115 is less accurate than on other systems due to system limitations (only 3 levels of power, good, medium and critic)
Battery Monitor Battery Monitor - Battery power information is an essential feature on the PocketPC and very important for people depending on their PocketPC''s, and not only.
You no longer have to worry about how much your battery will last, or go through the entire Control Panel just to see the percentage of remaining power
Other Software by developer «ZuinigeRijder»:
TouchLockPro TouchLockPro is designed not to interfere with running applications and is a multipurpose locking application. Other locking solutions are often specific for locking only incoming calls/SMS. A lot of locking solutions also place a (transparent looking) Window on top of the running application (e.g