Dog Leg Severity was developed for engineers in the field who want a good estimation of the True Vertical Depth and Dog Leg Severity inside of a well. The engineers can use the Well Survey points to enter the Measured Depth, Inclination and Azimuth to calculate the estimated True Vertical Depth and Dog Leg Severity based.
The calculations are based on the 'Minimum Curvature Method'. The ‘Minimum Curvature Method’, takes the space vectors defined by inclination and direction measurements and smoothes these onto the wellbore curve by the use of a ratio factor which is defined by the curvature (dog-leg) of the wellbore section. The method produces a circular arc as does the radius of the curvature. This is not, however, an assumption of the method, but a result of minimizing the total curvature within the physical constraints on a section of wellbore.
1: DLS = Arccos (Cos (INCL2 - INCL1) - Sin INCL1 * Sin INCL2 * (1 - Cos (AZIM2 - AZIM1)))
2: Factor = 2 / DL * (Tan (DL / 2))
3: TVD = SUM (((MD2 - MD1) * (Cos INCL2 + Cos INCL1) / 2) * CF)
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
Electronic Filter design Reference for Pocket PC Electronic Filter design Reference for Pocket PC is the combination of the following 2 individual modules :
FIR Filter Design Reference
IIR Filter Design Reference
Design FIR filters with required specifications and visualize the frequency plot and time plot
Tank Volume Calculator Tank Volume Calculator - Ideal for engineers, contractors, water and wastewater system operators, students, aquarium enthusiasts and more!
This application allows quick estimation of the volume of a cylindrical or rectangular tank. The user can choose either English or SI units
SuperCAD/Mobile SuperCAD/Mobile - SuperCAD is a program which is specialized for drawing electronic circuits
Handy RTD-Thermocouple Reference Handy RTD-TC Reference is a ready reckoner for Engineering professionals and other professionals involved with measurement of Temperature and Temperature sensors/transducers. It is not necessary to use Thermocouple/RTD tables to know corresponding output of any given sensor for particular temperature
Cuadrado Aplicacion que mediante un slider puede cambiar las propiedades de un cuadrado
PocketPC Resistors PocketPC Resistors helps figure out the values of resistors. Select the desired band and choose the color/value. The new resistor value is calculated and displayed. There are four, five, and six band resistors available.
PocketPC Resistors includes an Ohm's Law Calculator to calculate Voltage, Current, Resistance, and Power in a circuit