Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
pLamp pLamp -application which emulates a flashlight.
eatures of pLamp include:
* Incredibly small.
* No .NET framework needed.
* Five colours (white, red, green, blue and yellow) to choose.
* Blinking on Action button (new in 1.1)
* Circular/Rectangular shape on flashlight (new in 1.1)
* Settings are remembered (new in 1.1)
* Backlight settings (new in 1
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
RotateSE270 .NET RotateSE270 .NET - This little program rotates the screen on Windows Mobile 2003 SE devices in 270 degrees. Its perfect to be used in Today Screen Launchers.
THIS TOOL IS FOR WINDOWS MOBILE 2003 SECOND EDITION, PLEASE READ THE REQUIREMENTS BEFORE YOU WRITE A REVIEW SAYING THAT THIS DOES NOT WORK IN ANY OTHER OPERATING SYSTEM
PocketForce PocketForce - PocketForce is an application that turns your PocketPC (Compaq iPAQ in particular) into a $500 flashlight.
It fills up the display with white color and turns the backlight to the maximum brightness setting (iPAQ only). Tap on the display to turn it into a black mirror
ScreenLock Protect your PocketPC from accidentally turn itself on by disabling the hardware buttons and the screen. Screenlock makes sure you never activate your device unintentionally again
Bright Light This app will help you use your phone as a bright source of Light and in case of emergency you can also use your phone as an SOS device. Have Fun :)
UnSleep UnSleep - Looking for a way for your Pocket PC to turn off the backlight, but not enter suspend mode so soon? Use this application for those time when you need quick access to the device without waking it from suspend mode. And once your done, just exit the program and your original Suspend timeout is restored