Changelog (translated):
CustomFirmware Enabler 2.50 to 5.03 ChickHen by Xenogears and Becus25.
What is?
- A program that activates the functions of the M33 custom firmware using ChickHen.
What do I need?
- A PSP (Model 2000)
- Firmware version 5.03.
- ChickHen R2 (at least, look out with the patched versions may cause errors!).
2.50 Changes:
- Fixed bug that prevented version and patching of the hen to leave a game.
- Improved system pops, now you can install a flash version (whatever that is 5.00)
- Fixed a bug that prevented either activate the plugins.
- Improved detection system version, you can install over previous versions (not recommended).
- Improved detection system model, no longer crashes with modified versions of the hen (original versions are recommended to avoid problems.)
- Fixed a bug that crashed into the setup menu randomly.
- Improved the patching system ChickHEN.
- It is not necessary that the folder is called CFWEnabler.
2.10 Changes:
- Fixed a problem when you change settings for the plugins.
- Fixed internal problems.
- Fixed a problem that caused a crasheo accessing plugins and have no plugin.
- Improved detection of release.
2.02 Changes:
- Fixed a bug in the installation of the Pops (The PRX MD5 is different on each console, so the test worked, but then not)
2.01 Changes:
- Fixed a bug not detect either a previous installation (caused that could not be installed above the new version)
2.00 Changes:
- System pops native activation.
- System configuration Custom Firmware.
- Verification MD5 of files that are installed in flash, if you have not installed either, re-install.
- Nice interface.
- Safety flasheos unnecessary.
- Protection from ChickHen load the Custom Firmware.
(It is necessary that this ChickHen in a folder called "ChickHEN inside Photo or Pictures.)
- Changed version of the system (now shows 5.03 M33)
Installation:
- Copy the folder to your psp CFWEnabler in X: / PSP / GAME /
Example X: / PSP / GAME / CFWEnabler / EBOOT.PBP
How to use:
Starts ChickHen from the picture section. Then start the homebrew called "CFWLoader 2.50.
Follow the instructions that tells you the program.
FAQ:
- Can load isos? - Yes, yes, you can.
- Do you like my PSP Slim? - Yes, it does not matter.
- Does my PSP3000? - No, it does not work.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Sure you do not know? - Yeah, sure.
- Really? - Yes
- Really good for?
- Can you break my console? - This version has several checks to verify that everything is installed, it is 99.99% safe
- When you turn off the console I have to repeat the procedure? - Yes, you have to repeat it, but after the first time, no longer flashea anything.
- And you can not prevent either procedure? - Could be avoided if we could do an IPL compatible.
- Is expected to be in the future rectify the current problems? - It is possible, but is not guaranteed anything.
- Does the M33 SDK? - Yes, it works.
- Are the plugins? - Yes, they work.
Common Errors:
- When you start the program automatically goes to the menu --
It has not been able to reallocate the flash, make sure your version is correct ChickHen and you do not have a PSP 3000.
- I do not run the isos --
Make sure that your configuration is correct.
- I created a folder called SVCPlayer Why? --
You have a plugin that creates nothing to do with CFWEnabler.
- Other errors is important to check the plugins that are loaded can cause problems. Also, check your version of ChickHen is correct, but may fail.
Activate Pops:
To enable compatibility with Native Pops, it is necessary to remove some modules of an Official Firmware.
In this version you can flash any version of the Pops, but only 5.00 is recommended, other versions have not been tested.
- Required --
- A PSP that enables homebrew loading.
- An update Sony.
- PsarDumper. (http://rapidshare.com/files/165390935/psardumper500_3000_too.zip)
1.-The PsarDumper copy of our report.
2.-copy the firmware to the root of the PSP under the name "EBOOT.PBP"
3.-execute the PsarDumper.
4.-click on "X" and waited.
5.-When finished, enter usb from pc and have a root folder called F0.
6.-looking pops.prx files in the folder and popsman.prx kd (in F0)
7.-The Copy To Folder Pops within CFWEnabler
8.-Run the CFWEnabler.
9.-click on the option "Flash Modules Pops."
10.-We followed the instructions.
11.-Done, and you can delete the files from the Memory Stick Pops, both the EBOOT.PBP and the F0 folder as the files in the folder within CFWEnabler Pops.
Warning: Using the Firmware M33 can be accessed freely by the USB Flash0 care because you can cause a brick, you are advised not to change anything to the internal memory.
Acknowledgments:
- A Dark_AleX for the M33 modules.
- Especially him, who knows who he is, and that is part of the credit for helping him.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
PSP Pandora Deluxe PSP Pandora Deluxe
Changelog:
v2.6 (2008-10-30)
- Revert back to style of compression used in v2.3 for 64-bit compatibility.
- Removed AutoStart PRX from the Support Tools and added Custom FW Extender.
- Updated the following Support Tools:
Hellcat's Recovery Flasher 1.41 (Pandora)
CXMB 3
PSP Homebrew: Slide Enhance 1.0 PSP Homebrew: Slide Enhance 1.0
AbCang has released a homebrew app for your PSP Go called Slide Enhance.A This is version 1.0.A Take a look at the notes from ABCang below.
"This awesome PSP Go Homebrew application Enhance Slider for
the PSP Go Slide feature. More information about this released could be found below
MacroFire Here's the latest version of pen's MacroFire, a handy homebrew plugin that allows you to reassign the PSP buttons, adjust your analog stick's sensitivity and enable rapidfire mode, according to your desired taste
BakonICE * Menu response time for buttons heightened, but the flickering is up a little bit on some psps, depending on overclocking or not, what other plugins, etc... * Modified the thread priority on the UI thread (when it's used) to a much lower value * 3
CreatDir 0.3 For those of you who've taken a look at Mirzab14's newbie friendly homebrew app CreatDir, you might be interested in knowing that the developer has released the final version of this nifty little app for the PSP
Grand Theft Auto: Vice City Stories CheatDevice Been havin' fun with your VCS CheatDevice, haven't you? Well, today we bring you great news fellas, 'coz the amazing Edison Carter has just bumped up his CheatDevice for Grand Theft Auto: Vice City Stories to v2
Homebrew Sorter Plugin Homebrew Sorter Plugin
1. WHAT IS THIS?
----------------
This plugin automaticaly sorts the homebrews, which are displayed in XMB, according to their frequency of execution.
2. HOW DO I INSTALL/USE THIS?
-----------------------------
Copy "homebrewsort.prx" to "ms0:/seplugins/" and append the following line to "vsh
HostCore Easy Installer The Coders Heaven Team released a HostCore Easy Installer now in version 1
PSP-HUD PSP-HUD
Homebrew developer darko79 has released the first version of PSP-HUD, a plugin for the PSP that allows you to display your unit's info on either the left or right bottom corner of your screen. The plugin can be easily configured via the note button.
The plugin displays basic info such as CPU speed, remaining battery power and the current time
Comments on Custom Firmware Enabler:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if Custom Firmware Enabler supports it
