CustomFirmware Enabler 2.10 to 5.03 ChickHen by Xenogears and Becus25.
What is?
A program that activates the functions of the M33 custom firmware using ChickHen.
What do I need?
- A PSP Slim (Slim only works with, regardless of the plate you have)
- Firmware version 5.03.
- ChickHen R2 (at least, look out with the patched version!).
2.10 Changes:
- Fixed a problem when you change settings for the plugins.
- Fixed internal problems.
- Fixed a problem that caused a crasheo accessing plugins and have no plugin.
- Improved detection of release.
2.02 Changes:
- Fixed a bug in the installation of the Pops (The PRX MD5 is different on each console, so the test worked, but then not)
2.01 Changes:
- Fixed a bug not detect either a previous installation (caused that could not be installed above the new version)
2.00 Changes:
- System pops native activation.
- System configuration Custom Firmware.
- Verification MD5 of files that are installed in flash, if you have not installed either, re-install.
- Nice interface.
- Safety flasheos unnecessary.
- Protection from ChickHen load the Custom Firmware.
(It is necessary that this ChickHen in a folder called "ChickHEN inside Photo or Pictures.)
- Changed version of the system (now shows 5.03 M33)
Installation:
- Copy the folder to your psp CFWEnabler in X: / PSP / GAME /
To be well: X: / PSP / GAME / CFWEnabler / EBOOT.PBP
IMPORTANT: Do not change the folder name CFWEnabler!
How to use:
Starts ChickHen from the picture section. Then start the homebrew called "CFWLoader 2.00.
Follow the instructions that tells you the program.
FAQ:
- Can load isos? - Yes, yes, you can.
- Do you like my PSP Slim? - Yes, it does not matter.
- Does my PSP3000? - No, it does not work.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Sure you do not know? - Yeah, sure.
- Really? - Yes
- Really good for?
- Can you break my console? - This version has several checks to verify that everything is installed, it is 99.99% safe
- When you turn off the console I have to repeat the procedure? - Yes, you have to repeat it, but after the first time, no longer flashea anything.
- And you can not prevent either procedure? - Could be avoided if we could do an IPL compatible.
- Is expected to be in the future rectify the current problems? - It is possible, but is not guaranteed anything.
- Does the M33 SDK? - Yes, it works.
- Are the plugins? - Yes, they work.
Common Errors:
- When you start the program automatically goes to the menu --
Was unable to assign the flash, make sure you have a PSP Slim (2000), and if you go, make sure your version is correct ChickHen.
- I do not run the isos --
Make sure that your configuration is correct.
- I created a folder called SVCPlayer Why? --
You have a plugin that creates nothing to do with CFWEnabler.
- Other errors is important to check the plugins that are loaded can cause problems.
Activate Pops:
To enable compatibility with Native Pops, it is necessary to remove some modules of the firmware 5.00 official.
- Required --
- A PSP that enables homebrew loading (or PSP 2000 with Hen CFWEnabler voucher)
- The 5.00 update from Sony. (http://rapidshare.com/files/154173870/500.PBP)
- PsarDumper with support for 5.00. (http://rapidshare.com/files/165390935/psardumper500_3000_too.zip)
1.-The PsarDumper copy of our report.
2.-copy the firmware 5.00 to the root of the PSP under the name "EBOOT.PBP"
3.-execute the PsarDumper.
4.-click on "X" and waited.
5.-When finished, enter usb from pc and have a root folder called F0.
6.-looking pops.prx files in the folder and popsman.prx kd (in F0)
7.-The Copy To Folder Pops within CFWEnabler (X: / PSP / GAME / CFWEnabler / Pops)
8.-Run the CFWEnabler.
9.-click on the option "Enable Support Pops."
10.-We followed the instructions.
11 .- Done, and you can delete the files from the Memory Stick Pops, both the EBOOT.PBP and the F0 folder as the files in the folder CFWEnabler / Pops.
Warning: Using the Firmware M33 can be accessed freely by the USB Flash0 care because you can cause a brick, you are advised not to change anything to the internal memory.
Acknowledgments:
- A Dark_AleX for the M33 modules.
- Especially him, who knows who he is, and that is part of the credit for helping him.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
MacroFire Japanese coder pen has released a new version of MacroFire, a handy homebrew plugin that allows you to reassign the PSP buttons, adjust your analog stick's sensitivity and enable rapidfire mode, according to your desired taste
PSP Homebrew Locator PSP Homebrew Locator
Alex Richter has updated his Homebrew Locator for the PSP. It focuses on the eLoader, delivering the latest compatible homebrew for it.
New features for this version include :
* 30-50% less memory usage.
* Firmware 1.5 Support (not very good yet).
* Asynchronous downloads. So no more freezing.
* DL.QJ.NET used for downloads/screenshots
X-Flash X-Flash
Yes, it is time for another X-Flash release. The legendary PSP coder Art who releases another version of his homebrew flashing tool used for firmware customization has once again updated this amazing program today to version 15
Time Machine Configurator Time Machine Configurator
It's not uncommon to see homebrew developers building upon each other's work. Remember how Red Squirrel came up with an application to help configure Dark Alex's Time Machine software for the Sony PSP? Well, Red Squirrel has done it again with Time Machine Configurator v2.0
Flash copy Flash copy
Flash copy is a program that allows you to copy the contents of flash1 and flash0 on your PSP to your memory stick. It's a simple program, and useful for anyone wanting to dump their firmware to memory stick. The dumped firmware will be stored in ms0:/f0 and ms0:/f1.
Version 1
FW2.71CustomizerV0.6 FW2.71CustomizerV0.6
BadBoy's Firmware 2.71 SE Customizer v0.6 is a nifty tool you can use to customize your Firmware 2.71 SE (every SE, SE-A, SE-B, SE-B', SE-B'' etc). According to BadBoy's readme, the project was first started by Eiffel56. Unfortunately he bricked his PSP so he sort of lost interest in continuing with the project
PRXDecrypter PRXDecrypter
Developer's note:
jas0nuk recently released the source for PRXDecrypter, his nice little PSP decryption program. I took it upon myself to merge in the decryption keys found by coyotebean. Now, jas0nuk's nifty little program can decrypt the PSP Go files for FW 5.70, 6.10, and 6
Flashmod Flashmod
Thanks to a small donation drive organized by Fanjita, the PSP Community helped get Orbis PSP Development the replacement parts needed to repair their PSP and they have now released Flashmod v3. For those of you who are out of the loop, Flashmod is a program that will allow you to tweak and adjust the way your PSP operates
LCFW 6.39ME-2 installer for OFW6.39 LCFW 6.39ME-2 installer for OFW6.39
LCFW 6.39ME-2 installer for OFW6.39 by neur0n
-- What is this? --
This is LCFW installer for OFW6.39.
Only work on 01g ,02g , 03g, 04g, 07g and 09g model.
05g (GO)is not supported.
The degree of stability is still unknown.
Please test it on your own and refer to different people's test reports
PSPLock PSPLock
It really sucks to have unwanted folks barging in on your PSP, eh? Well those intruders have now found their match in the form of Auraomega's smart PSPLock. As the name suggests, and as the situation above implies, this app locks out users
Comments on Custom Firmware Enabler:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if Custom Firmware Enabler supports it
