Introduction
-------------------------------------------------
This program, PSP is a plug-in that runs on a custom firmware.
Sony Akira Makoto on normal firmware does not work.
It is routine, self-responsibility in any event.
Not to give anything to play and a prolonged failure to suddenly freeze.
Overview
-------------------------------------------------
Reassign the button, any button and set the batter,
Macro functions are performed automatically to certain operations.
Rensha settings, so that you can press to leave the state,
RPG and can be kind of a battle without the use of automatic rubber band and scheelite.
Macro function is to record the specific behavior, you can repeat it.
The analog stick adjustment or re-assigned function,
You may be able to cover some of the analog sticks and broken loose button.
I do not work with 3.71M33.
Firmware does not work with less.
PSP-2000 and PSP-3000 because the activity does not have to know,
RAM does not use the extension.
Installation
-------------------------------------------------
The following files are included with the ms0: / seplugins copies.
macrofire.prx
macrofire.ini
Then, ms0: / seplugins in
vsh.txt
game.txt
pops.txt
Add the following in their path.
ms0: / seplugins / macrofire.prx
If these files do not exist, please create.
After going to write RIKABARIMODO, Plugins item
Where the plug-in needed to Enabled.
However, VSH on "Internet browser" in the works is limited, and macro functions Rensha function does not work.
This is to address the concerns that they were offensive to other sites that mock these capabilities,
We want to ease the restrictions and measures.
The sample configuration file folder remap the re-set button assignments,
Remap settings menu is actually read from the configuration file.
MacroFire to run, this folder is not required.
analog_to_dpad.ini key is assigned to cross the analog stick,
dpad_to_analog.ini assigns to cross key analog stick.
Usage
-------------------------------------------------
When you start the game, using the two volume buttons (+ and - keys) and then by pressing the Start menu.
This button can be changed in the configuration file.
See below "configuration file" please refer to the item.
The basic key is the following menu.
↑ ↓: Move items
← →: Change Option
○ button: the decision of the items
e button: Back
START button: exit immediately Menu
This is a typical operation, the functions of other items,
May have another operation.
In this case, may have been written about how to manipulate the screen under each key.
Functions
-------------------------------------------------
MacroFire Engine
Or switch to activate this plugin.
Roll button and macro functions and features will affect all functions.
OFF immediately after the game starts it is, if you use the cross using the key switch to ON.
You can set the initial state in the configuration file.
Buttons to launch the menu
MacroFire game set in the button to display the menu.
The menu button you want to see here is set to ON, by pressing a button combination in the game,
MacroFire can display the menu.
You can set the initial state in the configuration file.
Buttons to toggle the engine state
MacroFire Engine without a menu ON / OFF button to switch between sets.
The button where you want to use the switch is set to ON, by pressing a button combination in the game,
If the MacroFire Engine OFF to ON, OFF ON switch to it.
You can set the initial state in the configuration file.
Tuning the analog stick sensitivity
Position and sensitivity of the analog stick to set the dead zone.
Details are included manual_analogsens.txt please
Remap settings
Set the re-allocation.
Details are included manual_remap.txt please.
Rapidfire settings
Sets of automatic fire.
Details are included manual_rapidfire.txt please.
Macro settings
And will run the macro function.
Details are included manual_macro.txt please.
Configuration file
-------------------------------------------------
Macrofire.ini and preferences,
Rensha configuration file, the macro file format is the same with the exception of some.
For more information, please see the included manual_ini.txt.
Work order
-------------------------------------------------
Adjust the analog stick, re-assign button, burst, macro,
These functions are handled by the order from the menu in a row.
In other words, after the re-allocation adjustment buttons and analog sticks,
Rensha processing, the results of macro-blazing after the treatment is used.
For example, in re-assign button, ○ e button □ button and then press the button simultaneously,
Settings button and automatic fire from e □ RAPID to the mode button,
○ at the push of a button, e □ is blazing a button and two buttons.
Known issues
-------------------------------------------------
- Back to the game screen to exit the menu screen is distorted for a moment.
- "Portable SSHO regionally everyday" burst mode, why does "RAPID" does not work.
"AUTO-RAPID" is to work.
To look at the press of a button on the left by way of something like that is a priority there.
Further cause is unknown.
Specifications
-------------------------------------------------
- Displaying the contents of the menu screen LCD (liquid crystal display) and the extent to leave off automatically,
Reflected a split second after the game at the end of the menu, it may be left to degenerate quickly.
In this case, if the game BGM, but a black screen as well BGM keeps ringing,
If there is no BGM, so careful to stay on the line power seems to freeze on the surface.
If you are in this state, PSP can resolve the brightness by pressing the Change button.
- The menu in the middle of a file access,
Will leave access lamp blinks and Memory Stick.
However, it seems that the visit has been really, is not particularly harmful.
However, when the state is to fetch a list of files,
Save the settings and macro Rensha / time out to run a load.
If the timeout is returned to the game once, and may try again later.
- Too bad English.
Not limited control.
Future Plans
-------------------------------------------------
- To switch settings for each game to load at startup.
- Remap settings to be more easy to use interface.
- Save the file / RODODAIAROGU,
To make the operation a little more about the files.
- Organize the code.
Finally
-------------------------------------------------
Although often seen with a light, plug-in is not a formal mechanism,
PSP games to work on is not considering the presence of plug-in.
Therefore, do not forget the game that always precariously freeze.
The game can be saved to save the行IMASHOU frequently.
Acknowledgments
-------------------------------------------------
This software, PSPLink has benefited greatly from the source code.
If you do not have this software and this is difficult.
And if there is no PSPSDK custom firmware, and there was such a development in itself.
Thank you take this opportunity.
Thanks all the developers of the PSPSDK, the PSPLink and the CFW.
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
RemoteJoyLite RemoteJoyLite
Homebrew dev Akind has released a new update for RemoteJoyLite. If you haven't come across it yet, RemoteJoyLite is a PSP plugin that lets you output video from your PSP to your PC monitor.
Akind says that this release, v0.20a, is still in alpha phase, so expect bugs. Here are the developer's notes regarding this release
MacroFire MacroFire MacroFire 3.0.4
Introduction
This program, PSP is a plug-in that runs on custom firmware.
Sony on Firmware Akira Makoto normal does not work.
The routine is self-responsibility in any event.
Not to give anything to play and a prolonged failure to suddenly freeze
Black32 XMB Theme - encore 4 Black32 XMB Theme - encore 4
We got word that Xploren's released a new version of his well-kn own Black32 XMB Theme. It's got some new features, and he does note a fix to the current problem of it disabling PSX emulators.
Here's what he had to say about Black32 XMB Theme - encore 4:
Black32 has been updated to encore4 [Mar.5th]
RenPSP 0.2 RenPSP 0.2
Today we have an update to RenPSP from the PSP Developer Team IIchan Eroge.A This takes RenPSP to version 0.2.A This is an update to the cross platform visual novel engine known as RenPy.A This update supports the RenPy scripts via RenPSP
PSP DocMaker GUI PSP DocMaker GUI
If Popstations get their own GUIs, why not DocMaker? DocMaker is a tool that generates the PS3-downloaded PSX game's manual files (document.dat). A document
BakonICE BakonICE
Version 1 Changelog:
Build 5.5:
-Secondary menu has analog, cheatbuttonage(longer you hold the faster it gets, to an extent), all the goodies.
-Added analog support for the in-game-only menu
-Added a bunch of crap to the secondary menu
-Fixed a retarded bug that was just a typo. It mixed up the stack area browser and the in-game menu
Fast Scroll Music Fast Scroll Music
from Torch:
This increases the vertical scrolling speed of the XMB by around 50%. You can scroll 300 songs in 10 seconds using this. This is the maximum possible speed that can be achieved without directly hacking vshmain.prx.
Changelog Beta-2:
Now only activates when the music player is open
CFW 6.20 PRO-B7 CFW 6.20 PRO-B7
Homebrew devs Coldbird, Virtuous Flame (aka Liquidzigong) and the rest of Team Pro has updated their Pro custom firmware for the 6.20 kernel.
Changelog:
Fixed NODRM Engine (DDF012 DLC Costume Bug)
Improved Inferno Game Compatiblity (GTA China Town, Corda2f, etc
Flasher Xmb Flasher Xmb
Despite Test30's admitted difficulty with english, the developer still managed to pass by our forums and bless all of use with his application that modifies the XMB, Flasher Xmb v0.1.
Word of warning though: be sure to follow the instructions carefuly as some flashing is required, and it follows that there's a risk of bricking your PSP
USBon Plugin (for 3.03 OE and 3.10 OE) USBon Plugin (for 3.03 OE and 3.10 OE)
In your opinion, what PlayStation Portable (PSP) plugin is the most useful? Whatever your answer is, we're pretty certain that that is quite debatable depending on our needs. To each his own, or so they say. But to homebrew coder vodkkaa, it's the one that concerns the handheld's USB function
Comments on MacroFire 2.4.1:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if MacroFire 2.4.1 supports it
