VJTodayButton - This simple app needs to be assigned to a Hardware Key using the control panel.
Then, when the assigned hardware button is pressed, the PDA will switch from your current application to the Today Screen. When you let go of the assigned key, it will jump back to the application you were previously in.
This app is used for instance to quickly view the Today screen whilst you are in a call or making some notes.
Remember: Press and hold the hardware button and you'll see a little icon in the top left.
Let go, and you should go back to where you were.
If you want to stay in the Today screen, just click on the little icon in the top left.
The cab will install two versions, TodayButton and TodayButtonOFF.
TodayButtonOFF will cause the PocketPC to switch itself immediately off when you've finished looking at the today screen. This is so that you can assign a hardware key and use it to switch on the PPC, look at the today screen, and immediately switch off when you're finished. This version is still not perfect, but try it and see if it works.
Do not launch it directly by stylus clicking in the programs menu. If you do, it'll go to the Today screen but you'll lose your hardware buttons for 45 seconds.
This program will not work perfectly with button redefiners like ButtonMax etc. Assign it to a key not being processed by ButtonMax etc.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
VJBaseHue VJBaseHue - This program is used to set the colour of the SoftKeys and Start Bar on WM5.
Modify the shortcut by adding a number on the end to represent the Hue you want
Use this chart to give you an idea of what value to use
Today Items Settings Simple program that allows for a shortcut to be created to it that will open the Today Items Settings
SwellDisk Maximize Capacity SwellDisk is a revolutionary low cost solution for million of users around the world to dramatically maximize the capacity of their storage card
Today Item Remover Today Item Remover - A small application that will allow you to remove items from your Today item selection screen. This is NOT REVERSIBLE so either backup your registry or you will need to hard reset/Reinstall the plugins to get them to show up again.
How To Use
1. Unzip to your device and launch the exe inside
2
InClose Mobile This is another task manager for Pocket PC and Windows Mobile. It lets you close programs and also handle currently running applications, soft reset and rotate screen functions. Multiple gestures such as tap, tap and hold, horizontal drag and diagonal dra
BatteryTimePlus BatteryTimePlus - It's a small Today Screen plugin which monitors battery's uptime since last charge and displays the current battery charge percentage on PPC's Today Screen
There is no option or whatsoever. Just install and your battery will be monitored. When the PPC is connected to a charger, the uptime will be reset to zero
MS Console MS Console provides a console for application which need one
Awady Pocket MultiClipboard Pocket MultiClipboard lets you copy and past more than one text seperatly at the same time without replacing each others in the clipboard
Kai's CE Pack.Net Kai's CE Pack.Net - Package of all new .Net-Applications (134 at this time).
You save more than US$ 900,- vs. buying as single programs.
That means only 47 Cent per program.
Single installation of every program
All programs are full versions, no keycode required
Download as single setup, e.g
VJBigPhone VJBigPhone - This small program is used to reformat the Phone Dialer that gets all shrunk down after applying the VGA hack.
It will allow the phone to be usable in VGA mode
What's New in This Release:
· added internal international support. No international command line required
Other Software by developer «Vijay555»:
VJPhoneToggle VJPhoneToggle - This program is used to toggle the phone.
If you have worries that the phone is using up too much memory in the background, assign it to a hardware key or a shortcut.
If the phone is open, it will be closed. If it is closed, it will be opened
VJBigPhone VJBigPhone - This small program is used to reformat the Phone Dialer that gets all shrunk down after applying the VGA hack.
It will allow the phone to be usable in VGA mode
What's New in This Release:
· added internal international support. No international command line required
VJBlueSync VJBlueSync - This program can be used to automatically enable BlueTooth, load ActiveSync and start a synchronization through BlueTooth
VJPhoneShortcuts VJPhoneShortcuts - Install this app to have a shortcut to the Call History screen and the Speed Dialer Screen on WM5 devices.
Current Tools:
-Enable Speaker Phone
-Jump to SpeedDialer
-Jump to CallHistory
-Load Inbox and check Pop Email (you must be in the Email account to use this, eg not in SMS account. This will be improved in the future
VJBaseHue VJBaseHue - This program is used to set the colour of the SoftKeys and Start Bar on WM5.
Modify the shortcut by adding a number on the end to represent the Hue you want
Use this chart to give you an idea of what value to use
VJSlippyPalm VJSlippyPalm - This is a support app for the the Palm Messaging App.
Once installed, you lose some access to the normal inbox, which you may still want.
Using VJSlippyPalm, you can assign the app to a hardware key.
Running VJSlippyPalm will then launch the Palm Messaging app
VJOkButt VJOkButt - This app is designed to be assigned to a hardware key or to be used with a program like SmallMenu or Xbar.
It will simulate pressing the OK button or Close button.
Note: it will close apps, not minimise them. So it can be used as a tiny taskmanager, to close tasks to save memory
VJEschaton VJEschaton - This program is used to soft reset, hard reset, toggle display, toggle LEDs (possibly!) and get Uptime for your PDA.
Note: It will hard reset. Please use this carefully.
Beta version:
For no good reason at all, I've tried to implement a sleep/power off mode
VJTrayLaunch VJTrayLaunch - This program is used to launch any application from the Today Tray.
VJTrayLaunch is only for launching a small number of apps. Don't use it for 15 etc (due to the 32 task limit on WM).
This is a command line application, and can be used to launch any program or shortcut
