Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
MagicLight MagicLight effects with your smartphone, simple and useful (if you need a small flashlight). Amaze your friends with light of police, fire, strobe, communicates using the old Morse code. (The only application that allows communication with the old morse code). Effect broken screen, white light ... and cooming soon with the next updates other cool effects
LEDFlasher LEDFlasher - turns the camera LED light into a variable length flasher. Simply tap the button and adjust the speed slider to power on the camera LED to the desired speed. It works on Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
LevelSight LevelSight - This application was originally built to flatten the brightness levels between AC and BATT on the Kaiser, but since lacking a workable front-camera API access, this works out better on devices with a light sensor.
More information is available here.
· works with native OEM backlight without extra
SpoonTorch SpoonTorch - Does your phone or PDA not have an external light on it? Do you want to use your phone's screen as a light?
This application lets you quickly create a white screen to use as a torch.
· Single tap of the screen to make the whole screen turn white. Tap again for the menu.
· Switching to fullscreen, backscreen brightness is set to maximum
SnowMan SnowMan - This program displays a snow man and displays a holiday banner.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
AutoLight AutoLight - HTC Topaz (Diamond 2) auto adjust backlight function is a good idea with a not very good implementation. It must be said to HTC excuse that the light sensor is very noisy, especially at low light conditions.
Some alternatives do exist but are not very good or are Compact Framework application (not a very good idea for background application)
PocketForce PocketForce - PocketForce is an application that turns your PocketPC (Compaq iPAQ in particular) into a $500 flashlight.
It fills up the display with white color and turns the backlight to the maximum brightness setting (iPAQ only). Tap on the display to turn it into a black mirror
The Tribe 2 for Pocket PC The Tribe 2 for Pocket PC - Life of a hideaway tribal village goes all plain to see. A small thatch hutment is pitched in the jungles beneath a dormant volcano. Nor chucklesome aborigines all rapt in hunting and gathering coconuts, neither you can yawn through the seen. After sunset the neigbourhood resounds with a slam bang clatter of tom-toms
FlashLight FlashLight Colors I wanted to make a flashlight in flash for some time now... The idea to use the pocket as a light is very useful and sometimes even necessary, either not to wake up someone, see in some dark stairs, getting late to the movies, etc etc..
nueKBLight nueKBLight - nueKBLight automatically turns on the keyboard backlight of your HTC Touch Pro when you switch to landscape mode, so you don't need to guess the first button to press anymore when using your device at night.
Note: The exe file in the archive is intended to be run on your phone/device. Copy the exe to your phone/device and run it from there
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Qtek 9600
