AutoLight - HTC Topaz (Diamond 2) auto adjust backlight function is a good idea with a not very good implementation. It must be said to HTC excuse that the light sensor is very noisy, especially at low light conditions.
Some alternatives do exist but are not very good or are Compact Framework application (not a very good idea for background application).
AutoLight is supposed to be a better implementation for the auto adjust backlight function.
Requirements and compatibility
AutoLight was developed for HTC Topaz (Diamond 2) with WM6.1 and it critically depends on HTCSensorSDK.dll, HTCUtil.dll and on a 10 levels backlight starting from value 1.
It has been reported to work with WM6.5 and on Rhodium (Touch Pro 2) and it might work on some other HTC phones.
AutoLight is a native application with a very low memory usage. On the other hand the Configurator requires Compact Framework 2 but it should be closed after the use.
The Configurator is designed for WVGA screens.
· Fix for phones where sensor data was returned as int instead that byte
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
SuspendDisabler SuspendDisabler works in the background and keeps your PocketPC power alive (ignores the timeout settings). Tap the button to enable and the program will keep the device powered on until you exit the program. NOTE: Use with caution since this can drain the PocketPC battery if left left unattended
LEDLuxLevel LEDLuxLevel is a LED flashlight that automatically turns on when you are in the dark and off again when the light sensor is exposed to light. Simply tap the button to start/stop the sensor. It works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
Flashlight Have always A flashlight with you! Its probably one of the most use full application you will install on your phone!
TouchResponse TouchResponse - This program is a touch driver to handle the touchscreen presses and vibration. TouchResponse will vibrate on touch.
A settings program exists to configure how the vibration works. Since this is a touch driver, there is no program you need to run to start it
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
EmergencyFlasher EmergencyFlasher - EmergencyFlasher can display a flashing light and it can be used when in emergency situations, at night.
EmergencyFlasher requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
G-Light G-Light - Adjust your backlight levels according to the values your light sensor measures.
Because I wasn't satisfied with the automatic backlight adjustment of my Diamond (it was always too bright for my needs), I made G-Light.
With this tool you can adjust your backlight levels according to the values your light sensor measures..
Hinavigator Hinavigator - Touch To Go is a software package that allows you to launch programs, make calls, view weather information, access Phone profiles, do ALT-TAB, turn on/off today Plug-ins, and navigate your device by only one hand
LEDFlashlight LEDFlashlight - turns your PocketPC into a LED flashlight. Simply tap the button to power on the camera LED light and tap again to power it off. It works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
Sicve Tutor Assist Sicve Tutor Assist - The Italian Sicve Tutor system checks that the mean speed of vehicles between verification "portals" is below the speed limit (typically 130 km/h)
GPS Receiver Reset Utility GPS Receiver Reset Utility - Sometimes GPS receivers (at least my Hamlet HBTGPS20) stop working correctely (no or unstable fix). Hamlet advice is to reset it using a desktop Windows program that they provide. Unfortunately, this requires a BT enabled desktop or laptop PC. Very unpractical indeed!
This small utility can be used to reset GPS receivers
SWE SWE This application plays a .wav file during a phone call. It can play the sound on the earphone or the speakerphone.
Usage:
Copy the .exe on your phone and run it
Select a .wav file using the Sound... button.
Test the sound using the Test button and regulate the volume using the + and - button
Schedule Reset Schedule Reset - Schedule Reset is a small utility that offers various enhancements for your Pocket PC:
- Soft reset of your device every day at a specified time.
- Optional warning sound and countdown before actual reset (just in case you are using the device).
- Optional execution of a script before the reset to delete garbage files, backup, etc
AutoAudioRoute AutoAudioRoute - At last VOIP works decently on many Windows Mobile 6.1 phones and it can be accessed using the standard dialer/phone application. The only problem is the sound trough the speakerphone instead of the earpiece
URL2Opera URL2Opera - As strange it might be OperaL.exe does not accept a .url file as command line parameter. Therefore, it is not possible to simply associate .url files to Opera and open them with it.
URL2Opera is a small application that extracts the URL from the .url file and passes it to Opera. This way the association became possible.
Install
Run URL2Opera.cab
SetSIP SetSIP - Changing SIP (software keyboard) type is both cumbersome (that small finger unfriendly arrow near the SIP icon) and slow (the selection menu does not pop up for a noticeable time). Worse on Topaz (Diamond 2) the menu has 2 levels: one for selecting between Touch Input full QWERTY and Phone Keypad and one for selecting other SIP types
