Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
DevState DevState - This is today plug-in for Pocket PC 2003 and Windows Mobile 5.0. This enables to add mainly 3 functions on your today screen like below:
- Displays Memory/Storage status.
- Displays Battery/Power status and it has following function.
>> Soft reset.
>> Turn off your device
TCD (Taskbar Clock and Date) TCD (Taskbar Clock and Date) - With this little program you can change the look of your date and time shown in the Windows Mobile taskbar.
What's New in This Release:
· Added CheckBox for choosing a date separator ( "/" "-" "
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
RandomColour RandomColour - This program generates a random colour each time you tap the bar. It also displays the 'RGB' values for the current colour.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
ScreenLock Protect your PocketPC from accidentally turn itself on by disabling the hardware buttons and the screen. Screenlock makes sure you never activate your device unintentionally again
ScreenCap ScreenCap, or Screen Capture saves a screenshot with whatever is currently on the Pocket PC screen.
ScreenCap is very easy to use. Start ScreenCap and then start which ever program's screen you wish to capture. When you have the screen you want to capture on the Pocket PC, press one of the buttons on the Pocket PC
Mobile ScreenTester Mobile ScreenTester is excellent for testing your PDA''s display to quickly find dead pixels. It is simple to use and it is also a very thin application and it is FREE!
Lumos Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2
ColorPicker ColorPicker - An amusing freeware that will let you personalize every one of your screens, without exception, by modifying the color of the components you want (title bar, menu backgrounds, etc...), like the Appearance tab of Windows Display Properties.
Also there are schemes available. In short, everything you need to see life through ... rose-tinted lenses
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Qtek G100
