Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Keylight Activate / Deactivate the keyboard LEDs on Treo 700w/750v, HTC TyTn, MDA Pro, MDA III and others
SnowMan SnowMan - This program displays a snow man and displays a holiday banner.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
LEDFlasher LEDFlasher - turns the camera LED light into a variable length flasher. Simply tap the button and adjust the speed slider to power on the camera LED to the desired speed. It works on Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
Hinavigator Hinavigator - Touch To Go is a software package that allows you to launch programs, make calls, view weather information, access Phone profiles, do ALT-TAB, turn on/off today Plug-ins, and navigate your device by only one hand
LavaLamp LavaLamp - This program simulates a lava lamp on your PocketPC computer.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
The Tribe 2 for Pocket PC The Tribe 2 for Pocket PC - Life of a hideaway tribal village goes all plain to see. A small thatch hutment is pitched in the jungles beneath a dormant volcano. Nor chucklesome aborigines all rapt in hunting and gathering coconuts, neither you can yawn through the seen. After sunset the neigbourhood resounds with a slam bang clatter of tom-toms
SafetyLight SafetyLight - This program is a flashing safety light that you use when you are trick or treating.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
DiscoLight DiscoLight - DiscoLight displays disco-like lights on the screen of your Pocket PC.
DiscoLights requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
LevelSight LevelSight - This application was originally built to flatten the brightness levels between AC and BATT on the Kaiser, but since lacking a workable front-camera API access, this works out better on devices with a light sensor.
More information is available here.
· works with native OEM backlight without extra
NiX Flashlight NiX Flashlight - Save 10%! Purchase this program directly from our website. http://www.nix-software.com With this program, you can use your Windows Mobile Pocket PC to guide you in the dark. It acts as an easy to use flashlight, perfect for travel. The light is bright enough to find your way in even the darkest of rooms
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Qtek G200
