Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
nueLight3 Light manager program for windows mobile pda phones
Firecracker Firecracker - This program is a firecracker with 5 second fuse.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
SoftNest discoSTROBE SoftNest discoSTROBE - The most stupid Application in the world
This Application simulates a Disco Strobe with various speeds (including random) and random optional colors.
Now you can simulate a Disco with your device, just put your favorite dance music, turn on discoSTROBE and have fun.
FREE $19
Awady ScreenOff A small handy tool to turn off your Pocket PC screen without turning off the device itself
NiX Flashlight NiX Flashlight - Save 10%! Purchase this program directly from our website. http://www.nix-software.com With this program, you can use your Windows Mobile Pocket PC to guide you in the dark. It acts as an easy to use flashlight, perfect for travel. The light is bright enough to find your way in even the darkest of rooms
ChristmasBulbs ChristmasBulbs - This program displays rotating colour lights on your PocketPC display. Select 'start/stop' from the toolbar to start or stop the lights.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
TCD (Taskbar Clock and Date) TCD (Taskbar Clock and Date) - With this little program you can change the look of your date and time shown in the Windows Mobile taskbar.
What's New in This Release:
· Added CheckBox for choosing a date separator ( "/" "-" "
QWERTY Backlight Timeout Changer QWERTY Backlight Timeout Changer - On many of the Windows Mobile devices with hardware keyboard there is no way to adjust the backlight on the keys to your liking. This little application lets you set the timeout to whatever you want
SmartLight Automatic Backlight Tired of the display backlight going out when you are looking at the screen - e.g. while thinking about the right word for an sms? Wouldn't it be nice if your phone knew when you needed the light and when not? SmartLight does just that: Once you have opened an application, the backlight stays on - until you close or hide the application, switching the light off automatically
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Qtek pm10a
