Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
PLToggle PLToggle is a small app that toggles the display orientation back and forth to the rotation of your choice, without the need for the g-sensor.
The default installation includes the settings screen (available from your start menu), and the application itself, which is available via a long-hold of the call button
Pocket LiTE Pocket LiTE is simple Torch / light app for Windows Mobile Phones. It has SOS function, which flashes SOS signal in Morse code
RotateSE270 .NET RotateSE270 .NET - This little program rotates the screen on Windows Mobile 2003 SE devices in 270 degrees. Its perfect to be used in Today Screen Launchers.
THIS TOOL IS FOR WINDOWS MOBILE 2003 SECOND EDITION, PLEASE READ THE REQUIREMENTS BEFORE YOU WRITE A REVIEW SAYING THAT THIS DOES NOT WORK IN ANY OTHER OPERATING SYSTEM
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
Rotate Me Simple application to rotate the screen of your device
SnowMan SnowMan - This program displays a snow man and displays a holiday banner.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
CEBeans ChristmasTree CEBeans ChristmasTree - This program displays a Christmas tree with flashing lights on your PocketPC computer.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
rk-Bk-Light Rk-bk-Light is a backlight command line switcher
MagicLight MagicLight effects with your smartphone, simple and useful (if you need a small flashlight). Amaze your friends with light of police, fire, strobe, communicates using the old Morse code. (The only application that allows communication with the old morse code). Effect broken screen, white light ... and cooming soon with the next updates other cool effects
Pocket Flashy Pocket Flashy-this 15 KB utility can help your friend identify you in a dark big party hall. Just Start the application and it will start flashing in various colours in the client area of the screen. Just a touch with your finger on the screen will stop the flash. Touch again to continue the flash
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Qtek pm10a
