nueClockControl - nueClockControl allows you to change the clock speed of your Qualcomm MSM7XXX(A) based mobile device.
Although overclocking is not possible yet, you can set the frequency of the ARM11 core to the preset ranges between 19.20 MHz and 528.00 MHz for MSM7x01A (384.00 MHz for MSM7x00). Note that Device Information always displays 528.00 MHz or 400.00MHz, so you should use nueClockControl to gauge your current device frequency.
There is also a command line mode:
nueClockControl.exe setting
where setting is a number from 0-7, corresponding to frequencies in the combobox. 7 is 528.00 MHz and 0 is 19.20 MHz. The numbers are different on the MSM7x00 400MHz parts.
Also note that it currently cannot determine the voltage level for non-A parts.
What's New in This Release:
· Added support for MSM7500/MSM7200, Added voltage level form MSM7501A/MSM7201A
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
Kai's Outlook Pack Kai's Outlook Pack - In this package are included 9 programs. Access to your important informations of outlook and database. You save here more than $ 60,- . Choice of most selled and best programs of Pocketkai
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
IBE Tweaks QVGA for Pocket PC IBE Tweaks QVGA for Pocket PC is the ultimate tool you need to personalize your PPC/PPC Phone. It allows you to customize Internet Tricks, System Tricks, File Tricks show system information and many other tricks. Requirements Windows Mobile PPC 2003 or SE, Windows Mobile 2005 or later. (Warning: some of the hacks below listed might not work in your device
EnumWindowsCe EnumWindowsCe - EnumWindowsCE is a type of TaskManager that lists the running programs on the Pocket PC. Simulating the function of the "Alt+Tab" of a Windows PC, it lets you jump from one program to another
Shake'n'wake Shake'n'wake - This utility creates a message queue and monitors power notifications. When the device is suspended, this application is put in unattended mode allowing it to continue running. Also the GSensor is requested to stay awake so it can remain to be polled
Handheld Sampler for Data Acquisition Handheld Sampler for Data Acquisition - Sampling control and viewing software used with the CF+ A/D and sensor cards from Handheld Design, Inc. Even if you don''t have any hardware device, the software will still work by using a signal generator to simulate hardware so you can experience the software. Currently Handheld Design, Inc
ValkSoft Space Reclaimer ValkSoft Space Reclaimer -"In summary, this is a very useful utility. It's lightweight and performs its tasks extremely quickly." - Pocket PC Life.
"...a product that dispenses with detritus, clears away the cookie crumbs, and takes out the temp-trash is practically priceless. In short, Space Reclaimer kicks butt." - DingBat Magazine
"Pocket PC Utilities" Combo "Pocket PC Utilities" Combo is a UNIQUE, ESSENTIAL combination of THREE POPULAR, INVALUABLE POCKET PC SYSTEM UTILITIES. And, it is available at over 40% OFF compared to individual products:
emProcess Manager for Pocket PC 2002/2003 - $25.99
Pocket Database Viewer for Pocket PC 2002/2003- $14.95
Pocket Resetter for Pocket PC 2002/2003 - $9
DialupMon DialupMon - Ever forgot to disconnect from the internet with your modem and running up your phone bill? All of us have at some time connected to the internet and then got side tracked with something else, just to see hours later that you are still connected!
You specifiy the amount of time before DialupMon will prompt you to disconnect
Other Software by developer «No2Chem»:
nueUSBKeyboard nueUSBKeyboard - nueUSBKeyboard turns your mobile device into a real USB HID Keyboard, allowing you to use your device's keyboard (or soft keyboard) to enter text, control the BIOS, etc on your computer, or other USB Host that accepts HID Keyboards (i.e. Playstation3, XBOX360, etc.)
nueTTY-Console nueTTY-Console - nueTTY-Console is an utility to communicate with HTC-branded Windows CE devices in bootloader mode. It uses the WinUSB library to communicate with the device. Currently only working in Windows Vista.
WARNING!!!
Some commands can damage or destroy ("brick") your device
nueClockViewer nueClockViewer - nueClockViewer lets you view the speed of internal clocks on msm7xxxA devices with remote client api support. These clock speeds are secondary clocks that control a number of functions ranging from I2C, Display and USB.
The meaning of each index varies from device to device, but typically index 0 = Applications Processor Datamover
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
nueAdvancedProcessor nueAdvancedProcessor - nueAdvancedProcssor lets you change some advanced processor settings such as program flow prediction, unaligned accesses, and the cache replacement strategy on ARMv6 or new processors
nueNullKB nueNullKB - nueNullKB is a new version of nullKB which does not require ATL and supports VGA devices (i.e. the icon is not stretched out anymore).
If you want to change the icon, use a resource hacker – the first icon is a 32x32 icon for VGA devices and the second icon is a 16x16 icon for QVGA devices
nueMassStorage NueMassStorage enables you to use your device as a USB Flash Reader, giving you direct access to your flash drive on computers or other devices that don't have Activesync
nueFont NueFont is a utility that lets you adjust system fonts
nueSIPDefault nueSIPDefault - nueSIPDefault automatically selects the default input method at startup. It is very lightweight and implemented as a service dll which unloads itself after it is done processing. It also has a configurable wait time to adjust for new versions of Windows Mobile that adjust the default SIP sometime during boot
nueRecMod nueRecMod - nueRecMod is an updated version of RecMod. nueRecMod recovers files from modules in the format Imgfstools outputs them in (S000, etc). It is based on RecMod by mamaich. However, this version is lighter and properly sets the imagebase, which is especially important when disassembling via IDA
