Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
SoftNest discoSTROBE SoftNest discoSTROBE - The most stupid Application in the world
This Application simulates a Disco Strobe with various speeds (including random) and random optional colors.
Now you can simulate a Disco with your device, just put your favorite dance music, turn on discoSTROBE and have fun.
FREE $19
Pocket PC Mirror 3.2 Pocket PC Mirror 3.2 - Great for a quick rearview mirror, especially in those cubicle situations. Also good for a last minute checkup before those pesky board meetings. Either way, it's a another great application from Pocket PC Advantage
NoScreen NoScreen - Shut off your screen whenever you don't need it
Mobile ScreenTester Mobile ScreenTester is excellent for testing your PDA''s display to quickly find dead pixels. It is simple to use and it is also a very thin application and it is FREE!
SpoonTorch SpoonTorch - Does your phone or PDA not have an external light on it? Do you want to use your phone's screen as a light?
This application lets you quickly create a white screen to use as a torch.
· Single tap of the screen to make the whole screen turn white. Tap again for the menu.
· Switching to fullscreen, backscreen brightness is set to maximum
FakeMoon FakeMoon - This program displays a fake full moon. This can be used for various purposes.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
LoveLight LoveLight - This program converts your PocketPC into a flashlight.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
MagicLight MagicLight effects with your smartphone, simple and useful (if you need a small flashlight). Amaze your friends with light of police, fire, strobe, communicates using the old Morse code. (The only application that allows communication with the old morse code). Effect broken screen, white light ... and cooming soon with the next updates other cool effects
AutoLight AutoLight - HTC Topaz (Diamond 2) auto adjust backlight function is a good idea with a not very good implementation. It must be said to HTC excuse that the light sensor is very noisy, especially at low light conditions.
Some alternatives do exist but are not very good or are Compact Framework application (not a very good idea for background application)
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Qtek S200 (PM300)
