Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
nueLight3 Light manager program for windows mobile pda phones
MyThemeResolution Simple application which shows your current sreen size and type, screen orientation plus the DPI value
Flashlight Have always A flashlight with you! Its probably one of the most use full application you will install on your phone!
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
MyLight A simple backlight controlling application
Pocket PC Mirror 3.2 Pocket PC Mirror 3.2 - Great for a quick rearview mirror, especially in those cubicle situations. Also good for a last minute checkup before those pesky board meetings. Either way, it's a another great application from Pocket PC Advantage
LEDLuxLevel LEDLuxLevel is a LED flashlight that automatically turns on when you are in the dark and off again when the light sensor is exposed to light. Simply tap the button to start/stop the sensor. It works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
mFlash mFlash is a camera flashlight application. With this app you can toggle the camera flashlight on and off, send SOS morse code and text you can enter. And there is a fun app inclusive, a simple but funny strobe light. It's a Samsung Omnia exclusive application so this means that it's only working on this device
FakeMoon FakeMoon - This program displays a fake full moon. This can be used for various purposes.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device RoverPC evo V7 (SIM V1)
