LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Kai's CE Pack.Net Kai's CE Pack.Net - Package of all new .Net-Applications (134 at this time).
You save more than US$ 900,- vs. buying as single programs.
That means only 47 Cent per program.
Single installation of every program
All programs are full versions, no keycode required
Download as single setup, e.g
YouTool YouTool is a tweaking tool for Windows Mobile.
enable the setting page
tty ---------------> Show or hide TTY page in phone settings
wireless --------------->Enables or disables OBEX to receive files.
pin2 ---------------> Show or hide pin2 page in phone settings
edge ---------------> Show EDGE icon on title bar when an EDGE connection is active
6
MySettings Use MySettings for direct access to the Windows Mobile Control Panel entries
Kai's Survival Pack.Net Kai's Survival Pack.Net - With the Survival Pack you are well equipped in the wildernes.12 chosen, suited programs, to help you survive every adventure
SetSIP SetSIP - Changing SIP (software keyboard) type is both cumbersome (that small finger unfriendly arrow near the SIP icon) and slow (the selection menu does not pop up for a noticeable time). Worse on Topaz (Diamond 2) the menu has 2 levels: one for selecting between Touch Input full QWERTY and Phone Keypad and one for selecting other SIP types
SIPChange SIPChange - SIPChange is for those who can no longer change their defaultIM using the reghacks after upgrading to AKU2.x. No matter what you choose, the keyboard SIP is always selected after a soft reset.
If you aren't having this problem, then you don't need this little app
ExecuteFiles ExecuteFiles - If you cannot automatically setup the applications within Sashimi, try this application. Sashimi runs all exe files that are placed within the /Sashimi/Auto/EXE folder but it can't execute .lnk files. So this little app has three files which you simply dump in /Sashime/Auto/EXE folder.
There will be a file called Executefiles.txt
Kai's Touch Pack.Net Kai's Touch Pack.Net - Touch Pack: 9 Touch Programs in a Pack. You save more than 50 US$
Content:
Car Dialer.Net
Car MP3 Player.Net
Night Clock.Net
Touch Appointment.Net
Touch Contacts.Net
Touch Keyboard.Net
Touch MP3 Player.Net
Touch SMS.Net
NEW:Touch eMail
SmartTweaker 2008 Smart Tweaker the ultimate Windows Mobile tuning utility !
SmartTweaker provides dozens of tweaks and software solutions for improving the functionality of your Windows Mobile Smartphone. An extremely popular application for its low price and the broad range of useful modifications it offers
RoamingFix6.5 RoamingFix6.5 - Force roaming on Sprint Windows Mobile 6.5 phones. There are three options: Home, Automatic, and Roaming. Those of you on VZW who use A/B, should not install this cab, as Automatic is the equivalent of Auto B on VZW
Other Software by developer «Martijn Stolk»:
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
