VJTodayButton - This simple app needs to be assigned to a Hardware Key using the control panel.
Then, when the assigned hardware button is pressed, the PDA will switch from your current application to the Today Screen. When you let go of the assigned key, it will jump back to the application you were previously in.
This app is used for instance to quickly view the Today screen whilst you are in a call or making some notes.
Remember: Press and hold the hardware button and you'll see a little icon in the top left.
Let go, and you should go back to where you were.
If you want to stay in the Today screen, just click on the little icon in the top left.
The cab will install two versions, TodayButton and TodayButtonOFF.
TodayButtonOFF will cause the PocketPC to switch itself immediately off when you've finished looking at the today screen. This is so that you can assign a hardware key and use it to switch on the PPC, look at the today screen, and immediately switch off when you're finished. This version is still not perfect, but try it and see if it works.
Do not launch it directly by stylus clicking in the programs menu. If you do, it'll go to the Today screen but you'll lose your hardware buttons for 45 seconds.
This program will not work perfectly with button redefiners like ButtonMax etc. Assign it to a key not being processed by ButtonMax etc.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
XCPUScalar 2007 XCPUScalar allows you to dynamically scale the processor speed of your handheld Pocket PC 2002, 2003, WM2003 SE, and Windows Mobile 5. It uses the power of the XSCALE or TI OMAP (OMAP850 and OMAP1510) processor and unlocks its dynamic scaling capabilities. You can scale the processor speed from 100 to 728MHz
VirtualDisp VirtualDisp - What it does ?
This program will let you use the screen of your PC and the screen of your Pocket PC as if they were connected to the same computer.
If you have ever used x2x, x2vnc or a computer with two graphics cards, you know what we are talking about
Backstep Backstep - This is a simple utility that will toggle the backlight of a Compaq iPaq from Off-Low-High-Low-Off each time it is run. There is no user interface, it just does its job and exits. I have assigned it to the record button on my iPAQ, so that I can easily toggle the backlight off and on whenever I wish
ScreenMagic Boost the power of your device's screen. Increase video memory, speed up the display, animate the display, enable cleartype and rotate the display (on certain devices)
FakeCursor FakeCursor simulates a cursor on the screen that can be moved using your keyboard
SmartTweaker 2008 Smart Tweaker the ultimate Windows Mobile tuning utility !
SmartTweaker provides dozens of tweaks and software solutions for improving the functionality of your Windows Mobile Smartphone. An extremely popular application for its low price and the broad range of useful modifications it offers
Font On Storage Font On Storage is a very simple program that is filling one of the gaps of the OS but sadly, there is no user manual and nothing on the author's website which is entirely in Japanese.
You must know that it is possible to install extra fonts in addition to the ones included originally. You just need to copy them to either the directory /Windows/Fonts/ or /Windows/
nueSlidingKB nueSlidingKB - nueSlidingKB is a system service that automatically switches between keyboards when you slide your Windows Mobile device open. This is convenient so that the SIP does not take so much space when you open your keyboard. nueSlidingKB also comes with a control panel so you can define sliding sound and keyboard parameters
EnumWindowsCe EnumWindowsCe - EnumWindowsCE is a type of TaskManager that lists the running programs on the Pocket PC. Simulating the function of the "Alt+Tab" of a Windows PC, it lets you jump from one program to another
XP.START XP.START - This program changes the Start logo.
When you tap the new logo a default Start menu is displayed. But when you tap-and-hold the new logo a new small menu is displayed. It gives you Power Off and Soft-Reset options. And it shows your name (Owner names - you written previously on the Settings)
Other Software by developer «Vijay555»:
VJDeviceLock VJDeviceLock - This program is only for use with the new Phone Roms that provide the Today Plugin, "Device Lock".
This small program can be launched, and it will immediately lock the phone using that plugin.
I'm not sure what it's compatible with - it works on my HTC Universal, and may work on the HTC Wizard
VJBigPhone VJBigPhone - This small program is used to reformat the Phone Dialer that gets all shrunk down after applying the VGA hack.
It will allow the phone to be usable in VGA mode
What's New in This Release:
· added internal international support. No international command line required
VJEschaton VJEschaton - This program is used to soft reset, hard reset, toggle display, toggle LEDs (possibly!) and get Uptime for your PDA.
Note: It will hard reset. Please use this carefully.
Beta version:
For no good reason at all, I've tried to implement a sleep/power off mode
VJBaseHue VJBaseHue - This program is used to set the colour of the SoftKeys and Start Bar on WM5.
Modify the shortcut by adding a number on the end to represent the Hue you want
Use this chart to give you an idea of what value to use
VJBlueSync VJBlueSync - This program can be used to automatically enable BlueTooth, load ActiveSync and start a synchronization through BlueTooth
VJSlippyPalm VJSlippyPalm - This is a support app for the the Palm Messaging App.
Once installed, you lose some access to the normal inbox, which you may still want.
Using VJSlippyPalm, you can assign the app to a hardware key.
Running VJSlippyPalm will then launch the Palm Messaging app
VJTrayLaunch VJTrayLaunch - This program is used to launch any application from the Today Tray.
VJTrayLaunch is only for launching a small number of apps. Don't use it for 15 etc (due to the 32 task limit on WM).
This is a command line application, and can be used to launch any program or shortcut
VJSmallIcons II VJSmallIcons II - This little program is used, like VJSmallIcons, to change the view mode of the "Programs" program launcher built into the Pocket PC.
Please launch Programs before launching VJSmallIcons II.
There are no command line options, just a configuration menu enabled by clicking on the little icon in the top right corner
VJPhoneShortcuts VJPhoneShortcuts - Install this app to have a shortcut to the Call History screen and the Speed Dialer Screen on WM5 devices.
Current Tools:
-Enable Speaker Phone
-Jump to SpeedDialer
-Jump to CallHistory
-Load Inbox and check Pop Email (you must be in the Email account to use this, eg not in SMS account. This will be improved in the future
VJTaskKiller VJTaskKiller - This program is used simply to kill a task by its title.
This is a command line application. It comes in two versions, one normal, one silent that won't show a message box if it can't find the application.
Usage: merely specify the caption of the window you want to close as a command line parameter.
Example usage
