Proximity Sensor and Screen - This application allows the user to select the proximity sensor to control the screen. The screen can be selected to be always powered or not.
When proximity sensor control is chosen, the screen of the phone powers down when there is an object close to the proximity sensor. Thus, the screen will automatically power down when the phone is put in the pocket or put screen down on the table. This works regardless whether the user has chosen to keep the screen to be always powered or whether the screen is normally controlled by the OS. When the phone is away from and object, the screen powers automatically unless the screen has previously been powered down not by the proximity sensor but by other means, such as the OS or a press on the Power Button.
When the screen has been chosen to be always powered, the user can use the phone as a flash light which can easily be turned on by, say, placing the phone close to the chest. This way, the user can shine light for a while to see around, then, quickly stop the light and then, whenever needed, to quickly turn the light on again with just a movement of one hand and not by the power button although the power button will also work as set up. This way, the user would save battery energy as compared to constantly flashing light which may not be needed. The power button still works but the proximity sensor, when used as a switch, is easier to use than the power button.
More information is available in the application.
Like it? Share with your friends!
Supported operating systems:
Google Android 10.x, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Not Shake Me Lite Not Shake Me interprets measurements from the movements you make with your Android phone. It reads information out of your movements. By now it can recognize six gestures. For example, when you shake it, it will say "Don't shake me please!".
The Six Gestures that the registered version can recognize:
1.Facing down
2.Shaking
3.Dropping
4
Locker for HTC One Locker for HTC One - How To Install:
- After your download finishes, all you need to do is open the application, click on the "set as active" button, go to the "installed" section (upper right corner), apply this theme and you're done!
- This is a GO Locker theme
Thermo (Android) Thermo measures the room temperature. After installation choose Menu > Calibration > and follow instructions.
What's New in This Release:
· bug fixed - When user doesn't have Internet connection Thermo runs well
What's New in 3.4:
· Talking Albert icon in apps form
· changes in rating form
What's New in 3
Signature Capture Signature Capture - Electronic signature capture library. Sign by touching the screen. Start as a normal app for demo. Requires internet connection. When used from external app saves/exports up to 5 signatures per week. Check website for instructions. For commercial purposes (like signing PDF documents etc.) contact support e-mail
Top Apps Top Apps discovers Apps, Games, and Content automatically, and recommends matches that are aligned with your personal taste. This is accomplished using unique technology that uses the power of your personal behavior
App Installer App Installer will scan your SD card for apk files and show you a single unified list of all the apps you can install
Xender Xender - Need to transfer files between phones or between your phone and computer? Try Xender and experience the coolest all-in-one file transfer and sharing app! Xender transfers anything you want, from documents, music, pictures, to videos and apps, in an instant with a few taps
miLife Quiet Now MiLife automatically silences your phone as your meeting (or movie) begins and brings the phone back to normal mode when the event ends. Hence you're not bothered by calls and/or alerts when you are busy
USBCurrent USBCurrent - When started, the program will show a message containing the amount of electrical current that is available to the phone through usb connection measured in Milliamperes [mA]. Normally the values should be 100, 300, or 500
Appcombine Appcombine is a lightweight and simple app manager tool.
Appcombine features:
· Safe task killer (beta)
· Install apps from SD card.
· Backup installed apps (sdcard/appcombine/archive).
· Uninstall/Launch apps.
· Show apps in Market.
· Autoscan SD card far not installed apps
Other Software by developer «Stevenstanleybayes»:
not found
Comments on Proximity Sensor and Screen:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Proximity Sensor and Screen is compatible with your device Sharp simple sumaho 4 TD-LTE
