LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Kai's Survival Pack.Net Kai's Survival Pack.Net - With the Survival Pack you are well equipped in the wildernes.12 chosen, suited programs, to help you survive every adventure
Page Down App Page Down App - Page Down App allows you to simulate a Page Down to map, for example, one of the front hardware buttons.
The appeal is that these buttons are easier to access than the ones on the side. So now you can comfortably read crime novels during your holidays
nueSIPDefault nueSIPDefault - nueSIPDefault automatically selects the default input method at startup. It is very lightweight and implemented as a service dll which unloads itself after it is done processing. It also has a configurable wait time to adjust for new versions of Windows Mobile that adjust the default SIP sometime during boot
VJSmallIcons II VJSmallIcons II - This little program is used, like VJSmallIcons, to change the view mode of the "Programs" program launcher built into the Pocket PC.
Please launch Programs before launching VJSmallIcons II.
There are no command line options, just a configuration menu enabled by clicking on the little icon in the top right corner
IBE Tweaks QVGA for Pocket PC IBE Tweaks QVGA for Pocket PC is the ultimate tool you need to personalize your PPC/PPC Phone. It allows you to customize Internet Tricks, System Tricks, File Tricks show system information and many other tricks. Requirements Windows Mobile PPC 2003 or SE, Windows Mobile 2005 or later. (Warning: some of the hacks below listed might not work in your device
Flash Gadgets Dozens of small gadgets for Windows Mobile
Process Killer Process Killer - Process Killer is a simple application for Windows Mobile devices to stop/kill any running processes. A list of currently running processes is displayed, and you simply have to select which ones to stop/kill and they are forcefully stopped/killed
IBE Tweaks VGA for Pocket PC IBE Tweaks VGA for Pocket PC is the ultimate tool you need to personalize your PPC/PPC Phone. It allows you to customize Internet Tricks, System Tricks, File Tricks show system information and many other tricks. Requirements Windows Mobile PPC 2003 or SE, Windows Mobile 2005 or later. (Warning: some of the hacks below listed might not work in your device
FavHack FavHack - FavHack turns on or off specific registry hacks, like turns on/off the "Dialer Skin", changes the SMS Threading view, disables/enables shozuRCP, etc. The program is in a very alpha stage, but at least it works
Other Software by developer «Martijn Stolk»:
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
