Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Awady ScreenOff A small handy tool to turn off your Pocket PC screen without turning off the device itself
G-Rotator G-Rotator is an application which uses the G-Sensor to detect the orientation of the device to change the screen orientation respectively. Sensitivity of sensor and duration after which data from sensor has to be fetched is user-defined
Siren Siren - This program converts your PocketPC computer into a siren.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
VoiceHiding VoiceHiding is a voice recorder that turns off the display when recording (hidden recorder). Select 'Record Hidden' from the toolbar and the program will start the voice recorder and power off/disable the display. Press the power button to view the display and stop the recorder. NOTE: It is illegal to record a person without permission in some countries
OmniaTorch OmniaTorch - Flashlight application for Samsung Omnia.
It uses the Samsung SDK v2.2 so only phones supported by it can use this application.
If you haven't already installed the SDK redistributable then download that cab and install that first
Gyrator Gyrator has an advanced graphical configuration interface which can be used to create thousands of combinations of events to suit every users needs. Windows can be excluded from all events, or only some of them. Customizable sound events can be triggered, and the device can be made to vibrate for any event
FastSettings FastSettings is a Windows Mobile program that allows you to control volume and backlight level. The main advantage is a finger friendly interface. It works fine on SE xperia x1, also, all the features are supposed to work on most of the latest HTC phones such as touch HD or Diamond
RBC9-Landscape RBC9-Landscape - RBC9-Landscape is a small tool to rotate your PDA screen (WM5 only) on the left or the right (in fact there are 2 programs, you can install only one): one clic rotate the screen, an other clic and the screen came back to normal.
RBC9-Landscape can be put in the systray (link above) or as an stand alone executable, started, for example, from a launcher
SosFlasher SosFlasher - SosFlasher can turn your Pocket PC into an SOS flashlight.
SosFlasher requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing, email the author
Keylight Activate / Deactivate the keyboard LEDs on Treo 700w/750v, HTC TyTn, MDA Pro, MDA III and others
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Sharp WS011SH
