Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Lighter Lighter - Do you need a light? The following lights included in software: * Simple lamp * Power saving lamp * Disco lighting * SOS lighting * Stroboscope (5Hz) * Simple colors Touch anywhere on screen to switch on/off lamp
G-Light G-Light - Adjust your backlight levels according to the values your light sensor measures.
Because I wasn't satisfied with the automatic backlight adjustment of my Diamond (it was always too bright for my needs), I made G-Light.
With this tool you can adjust your backlight levels according to the values your light sensor measures..
ChristmasBulbs ChristmasBulbs - This program displays rotating colour lights on your PocketPC display. Select 'start/stop' from the toolbar to start or stop the lights.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
JWMD SlideUnlock JWMD SlideUnlock - A Windows Phone 7 Lock like application for Windows Mobile.
· It's skinnable!
· Add your own Image or Text!
· Add your custom font.
· You can reposition the objects.
· Supports all resolution!
· Slide horizontally.
· Supports All Language.
· It's free
Morse Torch Morse Torch - convert your mobile into a pocket torch! This torch comes with a PTT key that allows you to use the torch for sending a message in morse code. The programm uses the mobile's flashlight LEDs.
Try the free demo version! This program is designed to work with HTC HD2, no other models have been tested for compatibility so far
Kai's Flash Light Kai's Flash Light - Use your Pocket PC as flashlight in the dark
Any color selectable
Adjust Brightness
Fullscreen and clear screen (without buttons)
New: Lightning Background in any interval from 100 ms to 5 sec.
Device don't Power Off!
System requirements:
Pocket PC 2000, 2002, Windows Mobile 2003 & SE, 5.0, 6
KeepScreenReadable KeepScreenReadable is a program for optional keeping backlight and changing orientation when specified application was executed. It doesn't look for specified app in process list but creates special shortcut to itself instead then executes your app from itself. So you can create a shortcut to a reader (PocketDjvu, FoxitReader, Alreader2), GPS navigation app etc
Mobile ScreenTester Mobile ScreenTester is excellent for testing your PDA''s display to quickly find dead pixels. It is simple to use and it is also a very thin application and it is FREE!
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
Pocket LiTE Pocket LiTE is simple Torch / light app for Windows Mobile Phones. It has SOS function, which flashes SOS signal in Morse code
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Sharp WS020SH