LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
HTC Advantage - Fix for Windows Live Messenger for German version HTC Advantage - Fix for Windows Live Messenger for German version - If contacts appear as offline in Windows Live Messenger even though they are online, download this fix (.exe file) and install it on your device to solve the problem.
Note: Only the 18125.0.2.3 OS build and earlier versions have this problem and need to be installed with the hot fix
PTTFix PTTFix - this little application replaces the Cingular PTT service and adds customizable launch capabilities back to that useless PTT button on your Cingular ROM equipped Hermes. This patch initially maps the PTT button to the built in Voice Dialer, but you can re-map the push as well as the hold functions to the application of your choice
Kai's - Today Cell Info Kai's - Today Cell Info - Today CellInfo shows important informations of the phone on the Today Screen. Name of the Network, Homezone, signal strength, GPRS or UMTS available or connected, W-LAN and Bluetooth.
Today Plugin for the Today Screen
Name of the Network, e.g
TF3D Standby TF3D Standby - A tool which gets the mobile device into standby while running TF3D without the need for MortScript, S2U2 and so on. It monitors powerstates like S2U2 does and turns off or turns on TF3D which allows the device to go into standby.
What's New in This Release:
· Timeouts are now configurable via register
VipMSCRexe VipMSCRexe - VipMSCRexe is a utility to run MortScript without Assigning .mscr extension to MortScript.exe
How to Use it
Rename exe to your scriptname.exe e.g if your script name is sashimi.mscr then rename this VipMSCRexe.exe to sashimi.exe
This utility will first find MortScript
XGuru An overclocking utility for Intel XScale processors. Compact yet effective
Touch Power Touch Power - StandBy, Soft Reset, Power Off for TF3D. Short press on "Power button": Kill manila & Launch "Touch Power". When TF3D isn't started just press Power button to load TF3D...Auto standby with Worstenbrood - TF3D Stanby
Microsoft Voice Command (Upgrade for Pocket PC Only)- US Version Microsoft Voice Command (Upgrade for Pocket PC Only)- US Version - Voice Command transforms your Smartphone into your own virtual personal assistant, letting you use your voice to look up contacts, make phone calls, get calendar information, play and control your music, as well as start programs
WirelessNotifyOff WirelessNotifyOff - This is a fix for the broken Wireless Networks detected pop-up in the OEM AT&T FUZE rom that is hardcoded to ON after each soft-reset. Install the cab and it will install the program into the right places to auto-start it after each soft-reset. You are also given the option of running it immediately
Hot Fix for Improving the On-screen Slider Feature for Answering Calls for HTC Touch HD Hot Fix for Improving the On-screen Slider Feature for Answering Calls for HTC Touch HD - When trying to answer a phone call, sometimes it is hard to answer the phone by using the on-screen slider. If you encounter this problem, download this hot fix to solve this problem.
Copy the hot fix, which is an .exe file, to your device. To install the hot fix, tap the
Other Software by developer «Martijn Stolk»:
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
