Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
ColorPicker ColorPicker - An amusing freeware that will let you personalize every one of your screens, without exception, by modifying the color of the components you want (title bar, menu backgrounds, etc...), like the Appearance tab of Windows Display Properties.
Also there are schemes available. In short, everything you need to see life through ... rose-tinted lenses
EmergencyFlasher EmergencyFlasher - EmergencyFlasher can display a flashing light and it can be used when in emergency situations, at night.
EmergencyFlasher requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
TCD (Taskbar Clock and Date) TCD (Taskbar Clock and Date) - With this little program you can change the look of your date and time shown in the Windows Mobile taskbar.
What's New in This Release:
· Added CheckBox for choosing a date separator ( "/" "-" "
SpoonTorch SpoonTorch - Does your phone or PDA not have an external light on it? Do you want to use your phone's screen as a light?
This application lets you quickly create a white screen to use as a torch.
· Single tap of the screen to make the whole screen turn white. Tap again for the menu.
· Switching to fullscreen, backscreen brightness is set to maximum
Screen Switch Screen Switch is a Pocket PC software that turn off screen of your PDA to save battery. It's very easy to use. Run the program, and the screen will be off. But the PDA is still working. It's useful to play music like mp3. To turn on the screen again, push the power button. Update Description:
v1
Pocket PC Mirror 3.2 Pocket PC Mirror 3.2 - Great for a quick rearview mirror, especially in those cubicle situations. Also good for a last minute checkup before those pesky board meetings. Either way, it's a another great application from Pocket PC Advantage
Lantern Lantern - This program is a flashlight for your PocketPC.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
Rotate Screen Toggles the screen orientation from portrait to landscape and vice versa
Lumos Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2
PocketForce PocketForce - PocketForce is an application that turns your PocketPC (Compaq iPAQ in particular) into a $500 flashlight.
It fills up the display with white color and turns the backlight to the maximum brightness setting (iPAQ only). Tap on the display to turn it into a black mirror
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Swisscom XPA S200 (HTC Prophet)
