Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Thumb Magic ThumbMagic makes it possible to perform most of your daily usage without using a stylus. Add appointments/tasks/contacts, send SMS/Emails, calculator & device statistics plugins
StickyCalc StickyCalc is a small plugin for the Today screen that will allow you to always have a small calculator under the stylus
Manila Today Page Manila Today Page- This is very first version of program many of HTC Diamond owners wanted very much...
This program displays today plug-ins in one of the TouchFLO 3D manila pages.
Setup Instructions:
- Setup MTPInstall.CAB to Main memory.
- Go to programs menu, run MTP Configurator.
- Choose page to host plug-ins, choose plug-ins you want to enable
nueNoBar nueNoBar disables the bottom bar on the today screen, giving you more space on the today screen of course without disabling your software keys functionality !
Note: Please be sure to reset after you install if you are using the cab file
FingerSuite FingerSuite replaces standard menu and message box for Windows Mobile devices. The resulting menus and alert boxes are much more attractive and also easier to use with your finger.
Usage:
- Configure autostart, skins and applications with the new control panel applet
OpenWith Adds to the context menu of the item "Open With ..."
CETUNER 2005 CETuner 2005 is a powerful utility for creating and changing themes, adjusting colors and customizing fonts on Pocket PC/Windows Mobile
SysColor Changer SysColor Changer is a Pocket PC application to change the system colors, e.g. system text color.
Usage Notes:
Select a component from the dropdown list that you wish to change.
Tap on the color box to select a color for the component.
Tap on the "Apply" after selecting the colors for all the components.
Exit and Soft Reset to activate the changes
MyAction myAction is a 30 button per page action screen for Windows Mobile. You can have more then one page! It’s basically a quick launcher with many shortcuts on one screen. Idea became from the iPhone interface.
It now includes customization of programs, apps, and attributes. There is also support for multiple pages with infinite buttons
SKTools (Supports WM5/WM6) SKTools (Supports WM5/WM6) - Powerfull maintenance toolkit. Cleaning the registry and the file system, FreeUP RAM, other methods of system maintenance and much more..
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Swisscom XPA v1605 (HTC Hermes 200)
