Version: 2.51

Platforms: Symbian OS, Series 60

Categories: Travel & Navigation

Upload date: 4 Nov 10

Developer: Viking Informatics Ltd

Price: 11.95 $

Downloads: 3226

File Size: 475 Kb

 

• Currently 2.38/5
• 1
• 2
• 3
• 4
• 5

Rating: 2.4/5 (Total votes: 8)

FEATURES

• displays location and waypoints on a map, displays compass or latitude/longitude;
• add, remove maps;
• add, remove a waypoint by typing its coordinates or marking its location on map;
• calibrate maps manually or importing from OziExplorer;
• phone standby mode can be switched off;
• connection to the GPS device is restored automatically;
• position source could be selected (Network based positioning also usable);
• correct mapping even for different projection systems
• metric/imperial/nautical units.
• NEW:save route into WP/CSV/KML file.

DISPLAY

Text: current position in WSG 84 format, speed, direction, altitude is displayed (text is red if no connection or no valid position is received from GPS device)
Map: current position is displayed with a yellow-black dot in the center of the screen (the map moves as position changes, dot always remains in the center). Dot blinks with red if no connection or no valid position is received from GPS device. Waypoint are also shown on map in order to help users to reach they desired position.
Compass: shows heading, points of compass, and direction of the next waypoint (other waypoints are also shown).

REQUIREMENTS FOR MAPS

• should be in GIF, JPG, PNG or BMP format;
• do not use too large maps, it will e.g. above 1000x1000 pixel, because the loading of the images will be slowed down, use several maps if large are should be covered.

HOWTO INSTALL A MAP

• copy the map to the phone (e.g. with PcSuite);
• start GPSMap, select Options/Maps, select Options/Add map...
• select one or more files or directories (for directiories, all applicable files in the directories will be added to the list) using the joy, then press OK;
• the map will be listed, with a red X mark, which means that is not calibrated yet, and it may not be used until it is calibrated.

HOWTO CALIBRATE A MAP ON THE PHONE

For calibrating a map, you have to go to at least two different places on the map by foot, by car, by bus, etc., with the GPS device and your phone. Both times, you have to locate your position on the map by selecting Options/View and calib. at the list of the maps. Press 'I am here' to record your positon (a red dot will show it on the map). After you have set at least three places, the red X mark at the list of the maps will become a green sign.

You can calibrate a map on your PC with OziExplorer, if you know the coordinates of at least two points on the map.

HOWTO CALIBRATE A MAP ON A PC WITH OZIEXPLORER

Download OziExplorer (http://www.oziexplorer.com), and start the TRIAL version (if you do not have a full version, of course). Select "File/Load and calibrate map image", select the datum (usually WSG-84) and projection system (e.g. Latitude/Longitude).
Add at least two points: select Point 1 on the tab on the right, select the position on the image, then enter the coordinates of that point. Repeat this with another point as Point 2. Please use points far away from each other, e.g. one in the left bottom part of the image, one in the top right part of the image. Select save, then exit.

HOWTO INSTALL A MAP CALIBRATED WITH OZIEXPLORER

• copy the map (*.gif, *.jpg, *.png, *.bmp) and the calibration file (*.map) to the phone (e.g. with PcSuite, into the same directory);
• start GPSMap, select Options/Maps, select Options/Add map...
• navigate through the directory structure pressing the joy left or right, select one or more files (the icon for maps with calibration files will be "OZI") or directories (for directiories, all applicable files in the directories will be added to the list) using the joy, then press OK;
• the map will be listed, with a green sign, which means that it is calibrated.

HOWTO DISPLAY YOUR POSITION USING A MAP

After calibrating a map, you can use it to display your position. Press FIRE to set the selected map as default, or set it to 'Automatic'. In automatic mode, always the map available for the current position will be displayed.
Panning: your position is in the center of the map, however, you can pan the map using the joystick (press the joy to make it centered again).
Zooming: you can zoom in or out using the * and the # keys.

HOWTO ADD WAYPOINT USING MAP SCREEN

• Go to the Map screen, and use the joystick to move the map;
• When a map is moved, a crosshair will shown up in the middle of the screen;
• In Options menu choose "Add this waypoint" then press "OK".

SETTINGS

Always on: prevent the phone from going into standby mode (to switch off the screen) - works only if a map is displayed and the position is valid.
Positioning: select the position source. If you do not have a GPS device, Network based could be a choice, but please note that this requires an Internet connection and initiates a connection each 30 seconds, so a flat rate is recommended.
Always on: prevent the phone from going into standby mode (to switch off the screen).

Name:


Comment:


Enter text from image below: