newTELnet P800 is a TELNET terminal emulator for the Sony-ericsson P800 and P900. The terminal engine, and user interface are based on the successful PSION and Communicator products. NewTELnet P800 is widely used by systems and network managers to access their equipment remotely, and for this reason it also includes a PING engine.
The user can therefore test the network connectivity and performance using the same application that he later uses to log into the host. The TELNETand PING connections are made via the standard TCP/IP stack built into the mobile telephone.
When troubleshooting it can be very important to see what IP path a connection takes. This can be easily shown by tracing the connection using the Path functions.
NewTELnet P800 Users are often responsible for large networks, and systems and need extra tools to help them manage their networks. The PING function in newTELnet P800 gives the user a analysis of the response time to a specific host in the network.
One of the most important design considerations was ease of use, for this reason the buttons can be configured by the user to allow easy entry of standard texts, or even program functions. A standard text, or escape sequence is entered in a very simple form, during which any control character can also be easily entered. By doing this the user can enter complex commands with a single menu click.
NewTELnet P800 stores the last remote internet addresses connected to, to help the user easily select different hosts without having to enter their addresses for each connection. The user just clicks on the entry, and the connection is immediately started using the correct protocoli.e. PING or TELNET.
The P800 screen is much smaller than its terminal counterpart. This typically results in the user having to scroll backwards and forwards to see the complete screen. Normal scrollbars can be used for this.
Another possibility, which can ease data entry is the "follow" cursor function. When this is selected, the program will automatically scroll to follow the cursor. Depending on the program running on the host, this can be an advantage or not. For this reason, this function is normally placed on one of the buttons to allow simple activation, or deactivation.
NewTELnet P800 supports all standard ANSI, VT2xx, VT100, VT52, TVI950, WSYE 60 and ADM3A escape sequences. The following codepages can be selected: ISO88591, IBM1252, UTF7, UTF8, GB12345 and GB2312.
NewTELnet P800 is a shareware program. It is fully functional, but will remind the user at regular intervals that he should register. After 30 Days it will expire, and not allow any more connections to be made. The registration can be made simply via one of the registration partners.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
UIQ 2.0
Similar Software:
Nokia Mobile Web Server Nokia Mobile Web Server- Make your Symbian s60 3.0 phone accessible via web browser with this mobile web server. Mobile Web Server is a phone application to which you can connect over the Internet with your web browser. This allows you to easily manage and use phone functions with a PC, no external software needed
Aspicore Ping (S80) Aspicore Ping (S80) - The classic utility for IP network diagnostics. Using the InterNet Control Message Protocol (ICMP) "ECHO" facility, measure round-trip-delays and packet loss across network paths
pyAutoAP pyAutoAP can be used to automatically select the most suitable WLAN or cellular access point available at the moment.
The autoAP module requires external PyS60 modules:
* wlantools
* elocation
The autoAP module is supposed to work in Nokia 3rd edition terminals supporting WLAN and GPRS/3G access (tested in Nokia E61i)
NetworkAcc - Mobile Network Accelerator NetworkAcc is a powerful mobile network accelerator specially designed for smartphone and BlackBerries. It accelerates all your mobile-network based activities, which include browsing, downloading, uploading, streaming, online gaming, sending and receiving email, etc
newDIAL95 newDIAL95 is a terminal emulator for the Nokia Communicator 9500/9300. The terminal engine, and user interface are based on the successful newDIAL9200 product.
The dial-in connection is made via the GSM mobile telephone built into the Communicator. Terminal connections can be easily made via the GSM network to remote hosts, or network switches using newDIAL95
newDATA9200 newDATA9200 is a GSM/HSCSD Data modem for the Nokia Communicator 9210/9290.
Although the Communicator is an excellent means of data entry when on the move, the keyboard, and screen are a bit small when at home, or in the hotel room.
Why not use the big screen, and keyboard of your Laptop or PC, coupled via the serial cable to the Communicator when you not on the move
PUTTY Touch PUTTY Touch is a free SSH client for Symbian S60 5th edition touch mobiles. s60v5 - Contains putty for Series 60 version 5 - v 0.8.5 will most likely be last version for 5.0.
Changelog:
v 0.8.5 (15-Jul-2010)
- Added David Woodhouse's patches for x-term mouse.
v 0.8
OFTP alpha OFTP alpha - Yet another ftp client for S60 mobile devices, but wait this does not provides yet another similar functionality.
Application at Glance:
It will be bundled as a sis package to be installed directly on mobile device.
Application requires pyS60 installed on mobile device
GnuBox GnuBox allows you to access the Internet from your phone using your computer's Internet connection without paying any fees (like GPRS) to your operator, and at speeds up to 400 kbit/sec.
It can connect to the PC using Bluetooth or the USB cradle
Other Software by developer «NewNet marketing»:
newTELnet9200 newTELnet9200 is a TELNET terminal emulator for the Nokia Communicator 9210/9290. The terminal engine and user interface are based on the successful newDIALin9200 product.
NewTELnet9200 is widely used by systems and network managers to access their equipment remotely, and for this reason it also includes a PING and TraceRoute engine
newDIAL newDIAL is a terminal emulator for the Nokia Communicator 9210/9290. The terminal engine, and user interface are based on the successful newTELnet9200 product.
The dial-in connection is made via the GSM mobile telephone built into the Communicator. The serial line can however also be used for internet or direct connections to a host at speeds up to 115Kbps
newDIAL95 newDIAL95 is a terminal emulator for the Nokia Communicator 9500/9300. The terminal engine, and user interface are based on the successful newDIAL9200 product.
The dial-in connection is made via the GSM mobile telephone built into the Communicator. Terminal connections can be easily made via the GSM network to remote hosts, or network switches using newDIAL95
newDIALin P800 newDIALin P800 is a terminal emulator for the Sony-ericsson P800 and P900.
The terminal engine, and user interface are based on the successful newTELnet, and newDIALin 9200 products. The dial-in connection is made via the GSM mobile telephone built into the P800/P900
newDATA9200 newDATA9200 is a GSM/HSCSD Data modem for the Nokia Communicator 9210/9290.
Although the Communicator is an excellent means of data entry when on the move, the keyboard, and screen are a bit small when at home, or in the hotel room.
Why not use the big screen, and keyboard of your Laptop or PC, coupled via the serial cable to the Communicator when you not on the move
newTELnet for Revo newTELnet for Revo - NewTELnet for Revo is a full TELNET client for the PSION Revo. It also allows the serial cable in the docking station to be used to connect directly to servers, etc. ANSI, VT2XX, VT100, VT52, TVI950, and ADM3A esacpe sequences are supported
newTEL95 newTEL95 is a TELNET terminal emulator for the Nokia Communicator 9300/9500. The terminal engine and user interface are based on the successful newTELnet9200 product.
NewTEL95 is widely used by systems and network managers to access their equipment remotely, and for this reason it also includes a PING and TraceRoute engine
