TimeCalc is software which does the addition subtraction and calculation of time. (There is no multiplication division)
Please, in time calculation of every day such as calculation of working hours and calculation of the LAP time
- Feature
It can do the addition subtraction with 60 Shin
Also input of milli-second is possible
Because a certain calculation past record remains, with the manual copy paste in something available
"1 minute 23 seconds," converting also the input of "83 seconds" and so on in it calculates
Restriction:
Input maximum "999H 99' 99 is to" 999 ".
- Installation procedure
Thaws the ZIP file (the EXE file comes out)
With Active transferring the EXE file Sync and the like to Pocket PC, use
- Un installation procedure
Deleting the file which it installs by hand
Deletion (it does not delete the registry below by hand and is not concerned either the て)
- Version rise procedure
Please superscribe the new file, in the file of the time before
* Calculator tub
It is the main picture which calculates. It has reached input value and 2 line indications of GrandTotal.
From the beam "of the time" "amount" "second" "milli-second" it keeps inputting input of time, to order. Presently, whether it is in the midst of inputting, you show which beam with underline of the blue.
Example)
Case 4 hour 24 minute 32 seconds 268 are input, the key the tap it does in order below.
In addition, explanation concerning the principal button
BS - It is the Back Space. backspace button. To the middle you use when the beam which is input is corrected. C -It is the Clear. clear button. Input value is designated as 0. AC -It is the All Clear. all clear button. Input value and Grand Total are designated as 0.
* Result tub
Calculation past record is indicated to a certain.
By the fact that the tap it does inside the editing box, the text can be sent to the clipboard freely.
Clear- When the button is pushed, calculation past record is cleared.
Ver 0.34 2004/03/17
When 10key arrangement is modified with option setting after the starting, when being reflected, correcting the trouble which is
Ver 0.33 2004/03/08
Option adding the item of 10key arrangement to setting
Ver 0.32 2004/02/12
Application when starting adding reset processing
Ver 0.31 2004/02/10
Option it provided dialogue and tried to be able to abbreviate the input of each beam
When new starting calculation, 0 be sure to try to clear GrandTotal indication
Ver 0.30 2004/02/04
Library 1.23 loading
Entire the second look at UI
Ver 0.23Beta 2002/03/29
Dialogue adjusting the message handling when ending
Ver 0.22 2002/03/27
Correcting the trouble which does not respond to WM_CLOSE from the system
Ver 0.21 2002/03/14
The text "of the time amount second milli-second" key as was designated "=" in the beam which becomes input and decision,
Context option modification from the menu was made possible
Double bug correction of starting and check
Ver 0.20 2002/03/12
Menu compilation
Option setting dialogue compilation
Past record indicatory editing the scroll bar of the box was made non indicatory
Ver 0.10 2002/03/08
Temporarily just function compilation (transplantation from Windows edition)
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional
Similar Software:
IndicatorTimer IndicatorTimer is a count down timer that displays the total time left in the upper right corner of the PocketPC Task bar. Select the minutes/hours and tap the start button to start the timer. The program will update the title bar with the time remaining once a second. The program also will sound an alarm when the time has run out
Bivrin PocketTime Bivrin PocketTime - PocketTime is an excellent tool for time tracking. In every professional activity where time is measured, you can rely on PocketTime.
Set up your clients and projects you are involved in and you're ready to go.
PocketTime is Pocket PC, Pocket PC 2002 and 2003 compatible. It runs on StrongARM, XScale, MIPS and SH3 processors
Old Timer Old Timer - A multi-stopwatch with counters that survive even once you close the application, suspend your device or even soft-reset! Best of all, nothing is left running in memory, just start the application again and the values you see are as if you'd been running the application the whole time
Project Professional Project Professional is a Comprehensive Project Management Utility for Pocket PC. Safely stores Project details such as Project Schedule, Project Phases, Tasks for phases, Risks involved in a project, Project Reviews, Project Meetings, Client details, Closure report and Summary of a project
PocketOutlook Eraser PocketOutlook Eraser-This tweak is very useful when you going to recreate a pairing with a desktop Outlook (or Vista)… if you don’t delete all these things from your mobile device before connecting it to your desktop, all the things will be merged
Stopky for Pocket PC Stopky for Pocket PC - Simple watch & stopwatch with big digits. Times can be named and saved. You can stop your way home from work, to the school, to the bus. You know when leave home so you don't miss the date.
You can switch off the device while stopwatch is still running.
What's New in This Release:
· Not an installer
PhoneHold PhoneHold - This program can be used to time the total time you have been on hold. You can use this to track the companies/services that keep you on hold the most time.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Event Countdown Event Countdown-Event Countdown lets you add up to 200 events on your Pocket PC. You can countdown to a particular date or countdown from a set time. An alarm will sound when an event has been reached, there is also a standby option to save on battery power
WMStopWatch WMStopWatch — Multifunction app that acts as botha timer and a countdown clock with alert.
In regular stopwatch mode WMStopWatch shows:
* the time you started counting
* the current time
* total elapsed time (running total)
With countdown mode enabled you can input any combination of hours, minutes and/or seconds
DateCalcCE DateCalcCE - You can use DateCalcCE to quickly calcluate the number of days, or weeks and days, between two dates. Just choose the two days from the date pickers, and the difference is displayed in weeks and days, or just days. You can also find a date that is a specified number of days from another day
Comments on TimeCalc:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
TimeCalc is compatible with your device T-Mobile MDA Compact II
