DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
LED PartyBoard LED PartyBoard - LED PartyBoard - Be the center of the party! LED PartyBoard lets you type in a text, choose color and speed, and scroll the text sideways like a LED display on your Android! As seen on billboards, stock tickers, banners and traffic signs everywhere
Light Up Ad For concert-goers, usually there will be some slow songs segment where everyone will hold up their glow sticks or zippo lighters with fire or candles etc to wave in the air and sway together with the songs performed
laugh now cry later lockscreen laugh now cry later lockscreen - Want a funny, awesome and cool unlock screen for your android device ?
We bring to you our new and awesome laugh now cry later lock / unlock screen.
Super simple to use zipper laugh now cry later unlock app.
Simply install our Amazing laugh now cry later zipper unlock app
Flash Light LED Torch by JAM Flash Light LED Torch by JAM - Flash Light Torch instantly turns your device into a bright torch with the flash of cameras. The ultimate lighting tool takes full advantage of the LED light. And it is a screen light torch as well if you dont have camers...
Fingerprint screen locker prank Fingerprint screen locker prank - Fingerprint Screen Lock Prank is a prank or simulated app. The best app with the best features.. Unlock and lock your phone simulating fingerprint recognition. How to Use: -launch the app and click lock screen . Unlock your phone by keeping your finger scanned for 3 seconds. Tap touch panel while app analizes your fingerprint
Skull Zipper Screen Lock Skull Zipper Screen Lock - skull zipper screen lock more creative and attractive screen lock.
skull zipper screen lock is a free smart phone android application.
Using zipper lock screen, you can decorate lovely and sweet Smartphone! App which is used as the replacement of the ordinary lock screen
RootDim RootDim - This requires root privileges on your device and a backlit LCD screen (not OLED).
SuperDim lets you dim the display to very low levels--lower than the OS normally allows (that's why you need root privileges)--to save night vision. This will be particularly useful for serious amateur astronomers.
On some devices you can also turn off LEDs (e.g., power LED)
Tiny Flashlight + LED Incredibly simple and yet very useful flashlight application. Will use your device's LED if it has one.Note: Your widget may disappear when the app is installed on the SD Card. This is a bug in Android 2.2
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device TCL P331M
