DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Bna Saver Light Bna Saver Light - Bna Saver Light. When you need more than a flashlight, you need a Bna Saver Light!
Light up an entire room! Have a bright idea!
This is amazing new idea of lighting up the place using phone Shake.
Bna Saver Light is an exciting new app that turns your phone Shake into a simple lamp light to help find your way in a dark setting
Blinky Blinky is an enhancement application to the standard BLN which blinks the LEDs. It gives you an extraordinary amount of control, and can even vibrate for those who have their phone in their pocket.
Only works on the Galaxy S line
Simplest Flashlight Simplest Flashlight - Use your device's camera flash as a torch.
Simple and very useful flashlight app.
The simplest and most practical flashlight app, helping you out of the dark in one second
LED Flashlights Pro LED Flashlights Pro - The application has two modes. Toggle Flash light - The on and off states of the toggle button turn the LED flash light on or off. Blink - You can make the camera flashlight blink on and off constantly as regular intervals by using this feature. Once the blinking of LED has started, use the stop blink button to stop the blinking
LED PartyBoard LED PartyBoard - LED PartyBoard - Be the center of the party! LED PartyBoard lets you type in a text, choose color and speed, and scroll the text sideways like a LED display on your Android! As seen on billboards, stock tickers, banners and traffic signs everywhere
Bna LED Light Bna LED Light - Bna LED Light app for your device! Incredibly simple and yet very useful!
The brightest, fastest, and most handy flashlight you will ever have! The one you will never forget to bring when in need! Besides, it is designed to support all android devices!
With the most elegant design and the fastest startup, it definitely outruns the real flashlight
Screebl Lite Screebl is an application that keeps the phone's screen from locking (turning off) when you are using it
Auto Lock Unlock Ad Back in the old days when smart-phones are not the rage yet, the phones we have usually have those keypad lock mechanism. It help to prevent accidental press of buttons on the phone when we tuck our phones into pockets or bags etc
Flashlight - Instant On, FREE FlashLight - Bright Instant is the app to turn your device into a super bright flashlight instantly. This flashlight app uses the LED of your phone's camera flash to illuminate the way. A must have app for all phones!
