DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
2 tap launcher 2 tap launcher - is a launcher which will help you arrange all your applications in the most optimal and convenient way. The applications will be sorted out as cards and widgets on your desktop
No lock No lock - if you don't know how to disable auto lock of the display of your Android smartphone then this application is for you! All you need to do is to press an option button on the screen and the lock will be disabled or enabled in the needed time without needless settings
Pick-A-Color Nightlight Pick-A-Color Nightlight - Pick-A-Color Nightlight is an easy-to-use nightlight and sound machine. In three simple steps, you can turn on your nightlight and add a little safety, security, and comfort to any room. Here's what to do:
Step 1 - Choose Your Nightlight Color: Use the color wheel to select your favorite nighttime color
Smart Phone Lock - Lockscreen Smart Phone Lock - Lockscreen - Are you worried about exposing your PIN and Pattern while you unlock your phone?
Here comes Smart Phone Lock for the rescue.
Smart Phone Lock will set the current phone time as your unlock PIN for the lock screen
Quick Flash Light Quick Flash Light - use your device's camera flash / screen as a torch * Turn ON Flash LED at Maximum on a click * Turn ON and Turn OFF the Flash LED like using real torch. * Also shows the battery level. * Simple and cool UI design
Bulb Swing Bulb Swing - Swing the phone upward to turn on/off the light.
What's New in This Release:
· minor fix
What's New in This Release:
· bug fix
What's New in 5.7:
· minor enhancements
What's New in 5
Patternator Patternator - big collection of funny patterns, backgrounds and wallpapers to create unique lockscreens for Android device. Many colors and tints are available to select among. The utility also offers simple correction and handy settings to create masterpieces of any difficulty
App Locker Pro - Lock your apps App Locker Pro - Lock your apps - App Locker Pro is a very simple and easy app to lock all your apps. You can choose very easy every app that you want to lock. After you choose your password or pattern all you need to do is tap on a app and it will be locked, to unlock just tap again
Bna Bulb Light Bna Bulb Light - Bna Saver Light. When you need more than a flashlight, you need a Bna Saver Light!
Light up an entire room! Have a bright idea!
This is amazing new idea of lighting up the place using phone Shake.
Bna Saver Light is an exciting new app that turns your phone Shake into a simple lamp light to help find your way in a dark setting
LedEffects LedEffects runs as a service and applies different selectable effects to the DPAD ring of Raphael/Diamond phones depending on different events. Optionally notifications can be set for each event.
What's New in This Release:
· bugfixes: the sound checkbox is taken into account properly, the player is terminated properly (timed or when e.g
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Tecno Mobile Phantom A+