EpDetect - EpDetect is an accelerometer based mobile phone application that uses advanced signal processing to detect epileptic seizures. It runs on most mobile phones that support SMS messaging, movement detection and GPS position location.
The addition of the seizure detection signal processing enables the mobile phone to function as a wearable seizure detection system, with remote signalling to carers. EpDetect monitors the wearer's movements, distinguishing between normal movement and movement associated with a Tonic-clonic seizure. If a seizure is detected, EpDetect will contact your carer with your status and GPS position.
Detector Active Screen:
· Status Message - A "Seizure Detected - press the clear button for 5 seconds to cancel" message will be displayed.
· Audible Alarm - An audible alarm will sound immediately upon detection of a seizure.
· Count Down Timer - A countdown from 30 seconds will be displayed to enable the user to press the cancel button prior to sending the outgoing SMS alert. The countdown timer is adjustable from 1- 60 seconds.
· Clear Button - A large 'clear' button graphic is displayed to allow the user to clear the detector active status, which also cancels any outgoing SMS alert. The 'clear' button must be pressed for 5 seconds within 30 seconds to prevent the outgoing SMS message.
Alarm Active Screen:
· Status Message - A "Seizure In Progress - press the cancel button for 5 seconds to signal the end of a seizure" message is displayed.
· Audible Alarm - A second audible alarm will continue to play until the alarm active status is cleared.
· Cancel Button - A large 'cancel' button graphic is displayed to allow the user to clear the alarm status, which also causes an end of seizure SMS message to be sent. The 'cancel' button must be pressed for 5 seconds to cancel the alarm active status.
· Additional Message - A message saying "This person may be having an epileptic fit" will be displayed on screen.
Advanced Options Screen:
· Back-Up Accelerometer Data - Tick box, which if ticked saves the raw accelerometer data that caused the last alarm condition to a file.
· GPS On/Off - Tick box, which if ticked activates the phone's GPS to generate location information, which is appended to SMS messages.
· Carer No 1 - The mobile phone number of the first carer, this number will receive an SMS message if an alarm condition is active.
· Carer No 2 - Optional, the mobile phone number of the second carer, this number will receive an SMS message if an alarm condition is active.
· Carer No 3 - Optional, the mobile phone number of the third carer, this number will receive an SMS message if an alarm condition is active.
· Alarm Message - The SMS message that will be sent when an alarm is active.
· Cancel Alarm Message - The SMS message that will be sent when an alarm is cleared.
· Detector Active Sound - Selects the warning sound to play when the detector is active.
· Alarm Active Sound - Selects the sound to play when the alarm has not been cancelled (could be an audio file such as; "Help this person is having an epileptic seizure").
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
PatientVoice PatientVoice - This program can be used by a doctor to adjust a patient's medication. Each time the patient comes for a visit record a short voice clip of the patient. Then you can compare the patients voice inflections.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
PatientBMI PatientBMI - This program calculates a patient's body mass index. Select metric or imperial and enter the body readings and tap the button to calculate the BMI.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
SmokeFolders SmokeFolders - This program can be used to help you to quit smoking. Each time you smoke add a new report for each smoke. The program stores the reports based on the date in folders in the 'SmokeFolders' root.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
PatientRounds PatientRounds - This program allows you to record short voice notes for the patients on your rounds.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
SmokeLimit SmokeLimit - This program can be used to quit smoking. Enter the total number of times you plan to smoke for the day. Each time you smoke tap the button. Each day decrease the number by 1 smoke.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
PanicPause PanicPause - This program allows you to time 60 second pause when you have a panic attack.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
SmokeGum SmokeGum - This program can be used when you use nicotine gum to quit smoking. Plan the times when you will use your gum. If you smoke then tap the 'smoke' button to log it.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
PatientFinger PatientFinger - This program can be used to test/build a patients hand/eye coordination. Start the program and have the patient use a finger to move the sights over the button. The program keeps track of the patients score.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Patient Database for HanDBase A Patient Database for HandBase that can be used as a mobile point of care database. It can also be used for group sign-out and daily billing
DrinkFacebooks DrinkFacebooks - DrinkFacebooks allows a doctor/nurse to track the patients that are using the DrinkFacebook. You can make categories of patients and for each patient the Facebook PID users code and token. When you tap on the sync button the program will download all of the patients drinking logs. This service is provided by FaceBook
Other Software by developer «Ep Detect»:
not found
Comments on EpDetect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
