Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Pocket LiTE Pocket LiTE is simple Torch / light app for Windows Mobile Phones. It has SOS function, which flashes SOS signal in Morse code
MetriX Metrix is a small but effective today screen plug-in showing the system information of your device like battery and memory status. It's very flexible and customizable plus that Metrix 2 has an options to add your own shortcuts which can make Metrix your new today screen launcher
SamsungBacklight SamsungBacklight - Tool for easier backlight switching. Any level (1 to 6) can be set via shortcut, 3 predefined levels (MIN/MID/MAX) and TOGGLE option in Programs/Backlight menu. These shortcuts can be easily assigned to a key. Run "SamsungBacklight.exe X" where X is number 1-6 or T for toggle
NoScreen NoScreen - Shut off your screen whenever you don't need it
mFlash mFlash is a camera flashlight application. With this app you can toggle the camera flashlight on and off, send SOS morse code and text you can enter. And there is a fun app inclusive, a simple but funny strobe light. It's a Samsung Omnia exclusive application so this means that it's only working on this device
VoiceHiding VoiceHiding is a voice recorder that turns off the display when recording (hidden recorder). Select 'Record Hidden' from the toolbar and the program will start the voice recorder and power off/disable the display. Press the power button to view the display and stop the recorder. NOTE: It is illegal to record a person without permission in some countries
Coaster Coaster - This program converts your PocketPC into a coaster. NOTE: Use a screen protector when using this program.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Keylight Activate / Deactivate the keyboard LEDs on Treo 700w/750v, HTC TyTn, MDA Pro, MDA III and others
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Unitech PA968II
