EpDetect - EpDetect is an accelerometer based mobile phone application that uses advanced signal processing to detect epileptic seizures. It runs on most mobile phones that support SMS messaging, movement detection and GPS position location.
The addition of the seizure detection signal processing enables the mobile phone to function as a wearable seizure detection system, with remote signalling to carers. EpDetect monitors the wearer's movements, distinguishing between normal movement and movement associated with a Tonic-clonic seizure. If a seizure is detected, EpDetect will contact your carer with your status and GPS position.
Detector Active Screen:
· Status Message - A "Seizure Detected - press the clear button for 5 seconds to cancel" message will be displayed.
· Audible Alarm - An audible alarm will sound immediately upon detection of a seizure.
· Count Down Timer - A countdown from 30 seconds will be displayed to enable the user to press the cancel button prior to sending the outgoing SMS alert. The countdown timer is adjustable from 1- 60 seconds.
· Clear Button - A large 'clear' button graphic is displayed to allow the user to clear the detector active status, which also cancels any outgoing SMS alert. The 'clear' button must be pressed for 5 seconds within 30 seconds to prevent the outgoing SMS message.
Alarm Active Screen:
· Status Message - A "Seizure In Progress - press the cancel button for 5 seconds to signal the end of a seizure" message is displayed.
· Audible Alarm - A second audible alarm will continue to play until the alarm active status is cleared.
· Cancel Button - A large 'cancel' button graphic is displayed to allow the user to clear the alarm status, which also causes an end of seizure SMS message to be sent. The 'cancel' button must be pressed for 5 seconds to cancel the alarm active status.
· Additional Message - A message saying "This person may be having an epileptic fit" will be displayed on screen.
Advanced Options Screen:
· Back-Up Accelerometer Data - Tick box, which if ticked saves the raw accelerometer data that caused the last alarm condition to a file.
· GPS On/Off - Tick box, which if ticked activates the phone's GPS to generate location information, which is appended to SMS messages.
· Carer No 1 - The mobile phone number of the first carer, this number will receive an SMS message if an alarm condition is active.
· Carer No 2 - Optional, the mobile phone number of the second carer, this number will receive an SMS message if an alarm condition is active.
· Carer No 3 - Optional, the mobile phone number of the third carer, this number will receive an SMS message if an alarm condition is active.
· Alarm Message - The SMS message that will be sent when an alarm is active.
· Cancel Alarm Message - The SMS message that will be sent when an alarm is cleared.
· Detector Active Sound - Selects the warning sound to play when the detector is active.
· Alarm Active Sound - Selects the sound to play when the alarm has not been cancelled (could be an audio file such as; "Help this person is having an epileptic seizure").
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
StressMeter StressMeter - This program allows you to track your total stress for the day. Adjust the slider to the number of mins. of stress and tap the 'add button'.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
CoffeeLimit CoffeeLimit - This program can be used to make sure you don't drink over a certain amount of coffee in a day. Set the maximum number per day and each time you drink tap the button.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
EmailerMedical EmailerMedical allows you to log customizable medical readings and sends the reports to your doctor/nurse in real time via email. You can set the name of the fields and when you add a new entry the entry is saved to a file and sent. NOTE: The program places the report in your Outbox if you are offline
SmokeChime SmokeChime - This program can be used to help you quit smoking. Select a chime interval and this program will chime on the interval and display a 'Smoke Allowed' bar. You can only smoke if you see the bar.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
DrugFriends DrugFriends - This program allows you to compose a lists of friends. For each person you can select up to 14 drugs (Legal/Illegal) that the person does. The program stores the data in a compact file format.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Glucopad Glucopad - Unbelievable Response - CLIENTS ARE Both Type 1 and Type 2 We have seen great interest in the short time of our product release 1.0. We believe our success is do to our main goal which is to develop the Finest Diabetic Management System for the Pocket PC Platform. Remember our product is "built by diabetics for diabetics"
CodeLogs CodeLogs - This program can be used by emergency staff when treating a person for a heart attack.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
MedicationPredictor MedicationPredictor - This program can be used to predict the refill date for a medication. Enter the total on hand, number taken, repeats and repeat number and tap the button to calculate the refill date.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
SmokingLimit SmokingLimit - This program allows you to set a limit for the number of cigarettes you have in a day.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
SmokeMaximum SmokeMaximum - This program allows you to set the total time in minutes that you will allow yourself to smoke for a day. Tap the button when you are smoking/not smoking.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Other Software by developer «Ep Detect»:
not found
Comments on EpDetect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
EpDetect is compatible with your device Unitech PA968II
