Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Pocket PC Mirror 3.2 Pocket PC Mirror 3.2 - Great for a quick rearview mirror, especially in those cubicle situations. Also good for a last minute checkup before those pesky board meetings. Either way, it's a another great application from Pocket PC Advantage
FlashLight FlashLight Colors I wanted to make a flashlight in flash for some time now... The idea to use the pocket as a light is very useful and sometimes even necessary, either not to wake up someone, see in some dark stairs, getting late to the movies, etc etc..
BikeReflector BikeReflector - This program allows you to convert your PocketPC into a bike reflector.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Fake FingerPrint LockScreen Fingerprints are among the most unique signatures known to mankind, and security is always a primary thought to the everyday tech user
LiteToggle LiteToggle is a simple utility to toggle the backlight between low, medium and bright levels for certain HTC devices.
Usage Notes
1. Ensure that "Auto adjust backlight" is disabled in the backlight settings.
2. Run the software to toggle the backlight level. No user interface is provided.
3
Mobile FlashLight Mobile FlashLight - Many people today carry mini-flashlights on the end of their key chain. Apparently there is a need for this type of device because many stores sell them near the cash registers in the checkout lines. I wonder why these mini-flashlights are so popular when almost everyone has a mobile phone today
Screen Off Screen Off - This application simply turns off the screen on the device, without putting it to sleep. Can be useful to save battery life when connecting the device to the PC or when running an application that doesn't need the display (like an audio player).
Tested on HTC Touch HD with WM 6.1 and 6.5.3.
It DOES NOT require .NET Compact Framework
G-Rotator G-Rotator is an application which uses the G-Sensor to detect the orientation of the device to change the screen orientation respectively. Sensitivity of sensor and duration after which data from sensor has to be fetched is user-defined
SamsungBacklight SamsungBacklight - Tool for easier backlight switching. Any level (1 to 6) can be set via shortcut, 3 predefined levels (MIN/MID/MAX) and TOGGLE option in Programs/Backlight menu. These shortcuts can be easily assigned to a key. Run "SamsungBacklight.exe X" where X is number 1-6 or T for toggle
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Unitech PA968II
