Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Screen Switch Screen Switch is a Pocket PC software that turn off screen of your PDA to save battery. It's very easy to use. Run the program, and the screen will be off. But the PDA is still working. It's useful to play music like mp3. To turn on the screen again, push the power button. Update Description:
v1
MagicLight MagicLight effects with your smartphone, simple and useful (if you need a small flashlight). Amaze your friends with light of police, fire, strobe, communicates using the old Morse code. (The only application that allows communication with the old morse code). Effect broken screen, white light ... and cooming soon with the next updates other cool effects
CarLights CarLights - This program allows you to convert your PocketPC computer into a head/tail light for your car.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
Pocket LiTE Pocket LiTE is simple Torch / light app for Windows Mobile Phones. It has SOS function, which flashes SOS signal in Morse code
Screen Off Screen Off - This application simply turns off the screen on the device, without putting it to sleep. Can be useful to save battery life when connecting the device to the PC or when running an application that doesn't need the display (like an audio player).
Tested on HTC Touch HD with WM 6.1 and 6.5.3.
It DOES NOT require .NET Compact Framework
FakeMoon FakeMoon - This program displays a fake full moon. This can be used for various purposes.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
CurtainCall CurtainCall - new pocket pc software screen locker for Windows Mobile.
CurtainCall features:
* Battery Meter
* Tasks current / overdue
* Scratch Caller Picture to answer and ignore incoming calls (Scratch down 50% to answer scratch horizontal 50% to send to voicemail
2Easy Lock Do your pants call people? Have you ever had accidentally pressed buttons because your screen came on unexpectedly? Do you worry that if an alarm or reminder goes off in your pocket you will miss it and randomly open programs or change your settings?
New features now available in version 2.0:
See how many unread messages you have
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device UTStarcom PPC6700 (HTC Apache)