Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
AD Hi-Res Icons for Pocket Informant, Pocket Breeze, Agenda Fusion AD Hi-Res Icons for Pocket Informant, Pocket Breeze, Agenda Fusion - 2500+ high quality icons for Pocket Informant, Pocket Breeze, Agenda Fusion. Designed for high res & standard screen.
Previously only available to Palm OS users, the AD high-res Icons Set is now made available for Pocket PC users due to popular demand
PointUI Home PointUI Home - Take back control of your device with Pointui Home. No need to fumble for a stylus anymore as Home is designed with generously sized finger friendly controls.
Home's intuitive controls and highly responsive user interface makes using your device a breeze
Zumobi (Windows Mobile) Zumobi lets you access, enjoy, and share web-based content on your mobile phone in a new and fun way.
Featuring a lush, intuitive Tile zooming interaction, Zumobi is optimized for on-the-go experiences across a wide variety of mobile platforms and phones
QBar Always shows the status of battery, memory, and memory card on the taskbar no matter what program you are running
tdLaunch tdLaunch - tdLaunch is a launcher with noticeable improvements.
The most important is the management of the shortcuts that is internal to the software, which greatly simplifies the configuration
SysColor Changer SysColor Changer is a Pocket PC application to change the system colors, e.g. system text color.
Usage Notes:
Select a component from the dropdown list that you wish to change.
Tap on the color box to select a color for the component.
Tap on the "Apply" after selecting the colors for all the components.
Exit and Soft Reset to activate the changes
Ultimate 25,000 3D Icons: Standard Size Set for Pocket Informant + PocketBreeze + Agenda Fusion Ultimate 25,000 3D Icons: Standard Size Set for Pocket Informant + PocketBreeze + Agenda Fusion
THE BEST SELLING ICONS FROM CHAMELEON COMPANY WITH TENS OF THOUSANDS OF SETS SOLD WORLDWIDE ARE NOW AVAILABLE FOR WINDOWS MOBILE!
The Ultimate 25,000 3D Icon set from Chameleon Company is still the most popular
Touch one TouchOne -Provide a community-demand based touch friendly interface.
Provide an easy to use SDK for anyone who wants to develop widgets / plugins, using .NET CF or XML.
Current Features:
(a changelog will ensue after the second release)
1.) Supports DLL Plugins for customizing Homescreen and additional screens. XML to be added shortly
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device UTStarcom PPC6700 (HTC Apache)
