Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application.
WARNING: if run unattended, this application can drain your mobile battery, as the device auto-off is disabled. Of course, default setting are restored when leaving the application
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
Off by RedGrep Off by RedGrep adds two icons to the Menu Command Bar, Off icon and Backlight toggle icon.
You do not need to press the power button in order to switch the Palm off or to toggle the backlight.
Usefull for various cases that hide the power Button.
Off is a Preffs panel! It will not be visible from an application launcher
Mirror+ Mirror+ turns the whole screen black, unlike other programs, and takes up just 2kb of space.
Run the program and your Palm or Visor will become an effective mirror, great for checking your teeth or fixing your hair before that big date
AppLight Hack AppLight Hack - control the Backlight state for a specific application
StreakHack StreakHack - Does your Palm 'streak'? Some Palm IIIx and Vx machines show 'streaking', shadow lines extending from vertical and horizontal lines on the display. This is especially noticeable in the Calendar view in the DateBook app.
StreakHack can help reduce the streaking. After activating StreakHack in HackMaster, adjust the contrast to your liking
PalmLight PalmLight - turns your Palm into a flashlight and emergency beacon.
PalmLight has two main modes, white light and red light.
· Use the white light option as a normal flashlight for seeing in the dark when a flashlight is not available.
· Use red light for night vision. Red light does not affect the dark adapted eye
BacklightDAs BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
Screen Prefs Screen Prefs sets the default screen color/gray scale depth and color scheme for your Palm OS device. It can handle screen modes from black and white (1-bit) all the way up to 16-bit color.
This program shows up in your Palm Preferences application (known as Prefs) and not in the application launcher. However, it can be configured to show up in the application launcher
StayOn for Fossil WristPDA StayOn prevents the backlight from automatically turning off after 10 seconds of inactivity
Torch-by-stone-age Torch-by-stone-age - Torch is the worlds smallest useful Palm app at 494 bytes! makes your screen as bright as possible through judicious choice of screen colouring (black)
Other Software by developer «Pierre Lescuyer»:
QuarkBox by Pierre QuarkBox by Pierre is a simulation of particles confined in a box, to observe effect of gravity on trajectories. Up to 100 particles can be added/removed using up/down hard buttons. Gravity can be tuned as in preferences.
This program requires Palm OS 3.5 or above. Color as well as Grayscale devices are supported
Polyedre by Pierre Polyedre by Pierre does nothing really useful. Pre-defined 3D grid volumes can be rotated around two axis using up / down / left / right hard buttons. This simple program was my first attempt for using Palm SDK graphic lib and hard button management.
Rotating step can be tuned through the Preferences.
This program works fine on Palm OS 3.5 and above
Metronome by Pierre Metronome by Pierre is a full featured electronic metronome.
Pulse volume, frequency and duration can be adjusted on a single screen.
In addition, Auto-off can be disabled (for usage over long period of time) and battery status can be displayed.
This program works fine on Palm OS 3.5 and above. Tested on the palm M and T series
UmtsCrunch by Pierre UmtsCrunch by Pierre is a database for UMTS Release 5 specifications, the so-called 3rd generation telecommunication system. The Zip file contains a .PRC and a .PDB file which need to be both installed on the Palm.
The program allows any kind of search through the list of database entries.
The database only contains specification title and name
